Operations - Bissell POWERTRAK 1307 Series User Manual

Operations

Remove cord from unit by twisting cord wrap and
plug into outlet.
To power on the vacuum, push the RED POWER
SWITCH located near the bottom of the vacuum
on the back side.
For normal cleaning mode, push downward on
handle recline pedal with foot and recline the
vacuum. For low, hard to reach areas, push the
pedal again and the vacuum will recline even
lower from normal cleaning mode.
Height Adjustments
Turn dial on powerfoot to adjust to one of
5 height adjustments.
Lowest Setting: For low pile carpet and bare
floors.
Medium Setting: For medium pile carpet.
Highest Setting: For high pile and most shag
carpet. Adjust to high setting if difficult to push.
NOTE: For optimal carpet cleaning performance,
adjust to the lowest practical setting. If your
vacuum is difficult to push, or is pushing larger
debris, adjust to the next higher setting.
Triple Action™ Brush Roll
The Triple Action™ Brush Roll is the floor brush
and is designed to maximize cleaning on multiple
surfaces.
• The two rows of short stiff bristles help to
remove dirt and pet hair from carpets.
• The long, silk-like white bristles help sweep
up debris from hard surfaces.
www.BISSELL.com
6
Power
Handle
Recline
Pedal
NOTICE:
The floor brush will continue to rotate while
you use your vacuum for above floor cleaning.
To prevent carpet damage, do not lean on the
vacuum or let the power foot tilt forward.