Drolet AUSTRAL III Owner's Manual page 33

7.3.2 Door Alignment
To align, open the door and loosen the pressures screws located on the lower and upper hinges
of the door using a 3/32" Allen key to free the adjustable hinge rods.
3/32"
Using a flat screwdriver, turn the adjustable hinge rods in the direction shown to adjust the
doors. Tighten all door hinge pressure screws when they are at the desired positions.
Configurations 1-2-3-4-5-6, show in which direction these act on the adjustment of the door.
3
4
Installation and Operation Requirements - Austral III
2
1
4
A
2
B
3
5
6
Page 33