Agilent Technologies BERT N4901A Getting Started page 5

Operating the Agilent Serial BERT
Changing Parameters
With the touchscreen, your finger is the
mouse. Tipping an item with your finger
is like clicking it with the mouse.
You can also use the knobs at the bottom
of the instrument to change certain
frequently used values in run-time.
Navigating the GUI
The menu buttons allow you to quickly
navigate through the instrument's four
software sections:
Results
You can use the numeric keypad
to enter values by hand,
or the large knob to adjust values.
Pattern Setup
Error Detector Setup
Pattern
Generator Setup
5