Agilent Technologies BERT N4901A Getting Started page 4

Operating the Agilent Serial BERT
Now that the instrument is running, let's take a look at its front
panel elements:
Power Switch and
Earth Terminal
The Agilent Serial BERT is available in different versions. Depending on your
version, some of the hardware and functionality described in this brochure
may not be available.
The rear panel of the instrument provides the following connectors:
Power
Supply
PS/2 Mouse
(green)
PS/2 Keyboard
(purple)
4
Instrument Setup Controls
PG Controls ED Controls
GPIB Port
Parallel Port
Serial Port 1
VGA Monitor
To avoid damage to the Serial BERT and your devices under test,
always use an ESD strap that is connected to the earth terminal.
Accumulation Controls
Preset
Local
USB
ED Connectors
USB 2.0 VISA Port
Ethernet Port 1/2
USB 2.0
Channel 0-3
Keypad and
Front Panel Knob
PG Connectors
Audio Line
Output Jack
Diagnostic
LED Stack
Audio Microphone
Input Jack