Garmin GPSMAP 1000 Owner's Manual page 56

• To adjust the contrast, select Contrast, and select Up,
Down, or Auto.
• To allow the chartplotter to automatically select the source
format, select Standard > Auto.
Garmin VIRB Action Cameras
®
Do not view video or photos while operating the vessel. Failure
to pay attention to the conditions on the water can result in
vessel damage, personal injury, or death.
Most VIRB action cameras connect to the chartplotter from the
camera menu (Connecting a VIRB Action Camera, page
The VIRB 360 camera connects using the VIRB app
(Connecting a VIRB 360 Action Camera, page
In this manual, the term "VIRB action camera" refers to all
models, except in the instructions on how to connect. In that
case, as listed above, the term "VIRB 360 camera" refers to only
the 360 model.
Connecting a VIRB 360 Action Camera
You connect a VIRB 360 action camera to the chartplotter using
the VIRB app. If you are connecting a VIRB camera, connect
through the camera settings
Camera, page 48).
1
Set up the chartplotter's Wi‑Fi network
Wireless Network, page
2
On your mobile device, download the GarminVIRB app.
3
On the VIRB 360 camera, hold Wi-Fi for two seconds to
enable the Wi‑Fi technology.
4
If you are using an Apple
settings on your mobile device, and connect to the camera
access point using the name and password on the camera
screen.
5
On your mobile device, start the GarminVIRB app.
The app searches for your camera.
6
If you are using a mobile device with Android
security prompt appears, enter the password for the camera
access point.
TIP: The access point name and password appear on the
camera screen.
The app connects to your camera.
7 From the GarminVIRB app, select
A list of nearby Wi‑Fi access points appears.
8
Select the chartplotter's Wi‑Fi network, and enter the network
password.
The app and the camera connect to the chartplotter's Wi‑Fi
network.
You can control the camera using the chartplotter.
Connecting a VIRB Action Camera
You connect a VIRB action camera to the chartplotter using the
camera settings. If you are connecting a VIRB 360 camera,
connect through the VIRB app
Camera, page 48).
1
Set up the chartplotter's Wi‑Fi network
Wireless Network, page
2
From the VIRB camera main menu, select Wireless > Wi-Fi
> Status to turn on Wi‑Fi wireless technology.
3
Select Mode > Connect.
4
Select Add New.
The camera searches for nearby Wi‑Fi networks.
5
Select the chartplotter's Wi‑Fi network, and enter the network
password.
48
WARNING
48).
(Connecting a VIRB Action
(Setting Up the Wi
5).
mobile device, go to the Wi‑Fi
®
, when the
™
> WiFi Connections.
(Connecting a VIRB 360 Action
(Setting Up the Wi
5).
The app and the camera connect to the chartplotter's Wi‑Fi
network.
You can control the camera using the chartplotter.
Controlling the VIRB Action Camera with the
Chartplotter
Before you can control a VIRB action camera with the
chartplotter, you must connect the devices using a wireless
connection.
You can connect up to five VIRB action cameras to the
chartplotter.
After you connect the VIRB action camera with the chartplotter,
a new option is added to A/V, Gauges, Controls. You can start
48).
and stop recording on the VIRB action camera using the
chartplotter.
NOTE: The VIRB image shown on the chartplotter is a in a
lower resolution than the VIRB action camera records. To view
the high-resolution video, view the video on a computer or
television.
1
Select A/V, Gauges, Controls > VIRB®.
2
Select an option:
• To take a still photograph, select
• To begin recording, select
When recording, the remaining recording memory is
shown.
‑ Fi
• To stop recording, select
• If you have more than one VIRB action camera
connected, use the arrows to select a different action
camera to control.
• To view stored videos or images, select
• To pan and tilt the VIRB 360, use the arrow keys.
• To return the VIRB 360 view to the home position, select
.
Controlling the VIRB Action Camera Video Playback
You can view VIRB action camera video and images using the
chartplotter.
NOTE: The VIRB playback on the chartplotter is shown in the
same quality as the live view on the chartplotter. To view the
high-resolution video, view the video on a computer or
television.
1
From the VIRB® screen, select
2
Wait a few seconds for the thumbnail images to load.
3
Select a video or image.
4
Control the playback using the on-screen buttons or menu
options:
• To stop the video, select
• To pause the video, select .
• To replay the video, select
• To play the video, select
Deleting a VIRB Video
You can delete a video or image from the VIRB action camera.
1
Open the VIRB video or image to delete.
2
Select MENU > Delete File.
‑ Fi
Starting a VIRB Video Slideshow
You can view a slideshow of the videos and images on the VIRB
action camera.
1
From the VIRB® screen, select
2 Wait a few seconds for the thumbnail images to load.
3
Select a video or image.
4 Select MENU > Start Slideshow.
To stop the slideshow, selcet MENU > Stop Slideshow.
.
.
again.
.
.
.
.
.
.
Viewing Video