Start The Program - Siemens WN34A140 Manual

de
Operate the device
2. Fill in the detergent and / or care
product.
Dosing tank I.
Detergent pretreatment
and clothing disinfection.
(only for device with pre-
treatment and disinfection
function)
Dosing tank Fabric softener, starch.
i
Do not exceed the
maximum load.
Dosing tank
Detergent for the main wash,
II
softener, bleach, stain
remover.
Dosing tank For dosing liquid
A *
detergents.
* depending on the model
Hints
Always follow the manufacturer's
■
instructions when dosing all
detergents, cleaning aids, care
products and cleaning agents. Dilute
thick fabric softener and fabric
■
conditioner with a little water. This
prevents blockages. Be careful when
opening the detergent drawer during
■
operation.
Dosing aid A * for liquid detergent
* depending on the model
Position the measuring aid A to measure
the correct amount of liquid detergent:
38
1. Pull out the detergent drawer. Press
the insert down and remove the
drawer completely.
2. Push the dispensing aid forwards, fold it
down and click into place.
3. Reinsert the drawer.
Note: Do not use the measuring aid for
gel-like detergents and washing powder or
for programs with prewash or the "Ready
in" time selected.
For models without a dosing aid to fill
Put liquid detergent in the appropriate
dispenser and place it in the drum.

Start the program

The key Start reloading 1 to
Hold down for 2 seconds and then
release. The program starts and the
washing machine door is locked.
The time until the program starts is
counted down in the display panel. After
the program has started, the program
duration is displayed. In addition, the
symbols for the program progress light up.