Advertisement
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.2.3 Photo Quality
This setting determines the level of compression the camera uses when saving photos to
your memory card. A high level of compression will produce a lower quality photo, and will
also use less space when saving your photos.
1. In PHOTO mode, press the MENU button. Select 'Photo Quality' by using the UP or
DOWN buttons. Press the OK button to enter the 'Photo Quality' submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Super Fine (highest quality), Fine, and Normal (lowest quality).
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.2.4 Photo Sharpness
This setting determines the visible detail of the photos being captured.
1. In PHOTO mode, press the MENU button. Select 'Photo Sharpness' by using the UP or
DOWN buttons. Press the OK button to enter the 'Photo Sharpness' submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Hard (sharp, saturated photo), Normal (medium sharpness), and
Light (soft, duller photo).
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.2.5 White Balance
This setting determines the color of light present in your photos. It can make scenes seem
warmer or cooler in lighting depending on how the scene you're shooting in affects the frame.
1. In PHOTO mode, press the MENU button. Select 'White Balance' by using the UP or
DOWN buttons. Press the OK button to enter the 'White Balance' submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Auto, Daylight, Cloudy, Tungsten, and Fluorescent.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
13
Advertisement
