The door seal should be cleaned reg-
ularly with clean water, and then
wiped dry with a soft cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the en-
ergy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example).
Cleaning and care
After cleaning
Replace all shelves and accessories
in the refrigeration appliance.
Switch the refrigeration appliance
back on, if necessary.
If you have activated the refrigerator
section's Cleaning mode :
Touch the OK sensor control on the
control panel.
will appear in the display.
Touch OK.
When Cleaning mode is switched
off, the dot in the upper corner of the
display disappears.
Use the and sensor controls to
scroll to the symbol and touch OK.
The refrigerator section will start cooling
again.
Switch the SuperFreeze function
on for a while so that the freezer sec-
tion can cool down quickly.
Switch on the SuperCool function
for a while so that the refrigerator
section can cool down quickly.
Place food in the refrigerator section.
Once the freezer has reached the re-
quired temperature, place the frozen
food back in the freezer drawers and
put them back in the freezer.
Switch the SuperFreeze function
off as soon as the temperature in the
freezer is a constant -18 °C or colder.
Close the appliance doors.
75