Table of Contents
Advertisement
Cleaning and care
Cleaning the door seal
Risk of damage due to incorrect
cleaning.
If you treat the door seals with oils or
grease, they can become porous.
Do not use any oils or grease on the
door seals.
The door seal should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the
energy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele Vacuum Cleaner dusting
brush, for example).
66
After cleaning
Touch the OK sensor on the control
panel.
will appear in the display.
Touch OK.
When Cleaning mode is switched
off, the dot in the upper corner of the
display goes out.
Use the and sensors to scroll to
the symbol and touch OK.
The refrigeration appliance will start
cooling again.
Refit all shelves and accessories in
the appliance.
Switch on the SuperCool function
for a while so that the temperature
inside the refrigeration appliance
drops quickly.
Place food in the refrigeration
appliance as soon as it reaches the
required coldness.
Close the appliance door(s).
Advertisement
Table of Contents
