Touch the symbol on the display
to confirm that the filters have been
replaced.
The "Replace carbon filter" reminder
will go out on the display and the
counter will be reset.
The symbol will go out on the status
display.
Cleaning the door seal
Risk of damage as a result of in-
correct cleaning.
If you treat the door seal with oil or
grease, it can become porous.
Do not use oil or grease on the door
seal.
The door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the en-
ergy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele Vacuum Cleaner dust
brush, for example).
Cleaning and care
After cleaning
Switch the Cleaning mode function
off again by tapping on the status
display.
Tap again.
When Cleaning mode is switched off,
the symbol will light up white.
The refrigeration appliance will start
cooling again.
Place all shelves and accessories
back in the appliance.
Switch on the Automatic Super-
Cool function for a while so that
the temperature inside the refrigera-
tion appliance will drop quickly.
Place food in the refrigeration appli-
ance as soon as it reaches the re-
quired coldness.
Close the appliance door(s).
73