Table of Contents
Advertisement
Console Assembly
7
‘
Loosen long wire and place behind front panel. Do not connect
at this time.
‘
Hold control panel close to bottom casting. Attach short ignitor
wire to electrode.
“
Position valves into burner tubes (see burner-valve view). Rotate
control panel up and rest flange over rail.
“
Attach control panel to legs with two screws (4) on right side,
one screw in top hole on left side.
Control Panel
Note:
Console may have unused
holes for features in other grill
models.
12 • 463351505
Be sure valves are inserted fully into tubes.
Valve/Hose
Regulator Assy
Burner Tubes
Ignitor Wire
4
Qty:3
4
Advertisement
Table of Contents
