Error Messages - Electrolux W4300H Operating Manual

Error messages

A fault in the program or in the machine is indi-
1
cated by an error message comprising
an error code and a descriptive text.
Resetting of error code and restart of washing
program can be done by a quick press on the
knob. If the error code returns after resetting, a
total reset has to be done, by pressing the knob
at least 10 seconds. The wash program is then
finished and the door can be opened, provided
that there is no water left in the drum.
Note!
Some error codes keep the door locked for 5
minutes after resetting. During this time, do
not try to start a wash program.
Code Text
001 NO WATER
002 DOOR OPEN
003 DOOR LOCk FAIL
007 OvERFILLED
008 NO HEATING
010 DRUM NOT DRAINED
For other error codes or repeated error codes, disconnect the power for 30 seconds.
If the error code keeps coming back, contact service personnel.
Error messages
Cause/Action
Water level acknowledgement not received in time.
Make sure the water taps are open.
Door position acknowledgement not received during
program. Open and close the door.
Door lock acknowledgement not received in time.
Open and close the door.
Water level above established safety limits during
program. Try to restart the machine.
The error code may be due to broken elements,
interruption of the power supply to the elements, a
broken heat contact, etc.
On machines built for washing mops, it can be caused by
too low a level in the program stage. The lowest level for
a mop program in the main wash with heating is 90 scale
units.
Water above established level after drain. Make sure the
drain is not blocked by lint or foam. Try to restart the
machine.
1
eRROR
001
No water
25
6204