Contents Getting Started ......................3 Package Contents ....................3 Installing the Monitor Stand ................... 4 Adjusting the Monitor ..................... 5 Monitor Overview ....................6 Connecting the Monitor to PC ................8 OSD Setup ........................9 Navi Key ........................9 Hot Key ........................9 OSD Menus........................
This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity. Package Contents Monitor PRO MP2422C Documentation Quick Start Guide External Power Supply & Power Cord Accessories Cables High Speed HDMI™...
Installing the Monitor Stand 1. Leave the monitor in its protective foam packaging. Align the stand bracket to the monitor groove. 2. Push the stand towards the monitor groove until it locks in place. 3. Connect the base to the stand to secure the base. 4.
Adjusting the Monitor This monitor is designed to maximize your viewing comfort with its adjustment capabilities. ⚠ Important Avoid touching the display panel when adjusting the monitor. ∙ -7° +22° Getting Started...
Page 7
Power LED Lit in blue after the monitor is turned on. If no signal input, the LED will turn into flicker blue. LED goes off when the monitor is turned off. Power Button & Navi Key Kensington Lock Power Jack HDMI™...
Connecting the Monitor to PC 1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Assemble the external power supply & power cord. (Figure A) 4. Connect the external power supply to the monitor power jack. (Figure B) 5.
OSD Setup This chapter provides you with essential information on OSD Setup. ⚠ Important All information is subject to change without prior notice. Navi Key The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu. Up/ Down/ Left/ Right: ∙...
OSD Menus Picture 1st Level Menu 2nd/3rd Level Menu Description Modes User ∙ Default is Standard. ∙ Use Left or Right Key to select and preview Standard mode effects. ∙ Press the Enter Key to confirm and apply your mode type. Graphics Movie Brightness...
1st Level Menu 2nd/3rd Level Menu Description Low Blue Light ∙ Default is Off. ∙ Low Blue Light protects your eyes against blue light. When enabled, Low Blue Light adjusts the screen color temperature to a more yellow glow. ∙ Activating Low Blue Light will affect: Affected Function Function Status »...
1st Level Menu 2nd/3rd Level Menu Description Color Temp. Normal ∙ Default is Warm. ∙ User Mode R/G/B Gain Default is 50. Warm ∙ Use Left or Right Key to select and Cool preview mode effects. User R Gain 0-100 ∙...
Page 13
1st Level Menu 2nd/3rd Level Menu Description Auto Source ∙ Default is On. ∙ Users can use the Navi Key to select Input Source at below status: • While “No Signal” message box is shown on the monitor. Wide Mode Full ∙...
Information 1st Level Menu 2nd Level Menu Description Main Source ∙ Display Main Source information. Resolution ∙ Display Resolution information. H/V Frequency ∙ Display H/V Frequency information. Mode ∙ Display Adaptive-Sync status information. Series Number ∙ Display Series Number information. Reset All Settings ∙...
Specifications Monitor PRO MP2422C Size 23.6 inch Curvature 1500R Panel Type Resolution 1920 x 1080 (FHD) Aspect Ratio 16:9 Brightness 250 nits (typ.) Contrast Ratio 3000:1 Refresh Rate 100Hz 1ms (MPRT) Response Time 4ms (GTG) 16ms (Tr + Tf) ∙ HDMI™ Connector x1 ∙...
Page 16
Monitor PRO MP2422C Dimension (W x H x D) 539.8 x 414.1 x 203.0 mm 2.95 kg Weight Gross 4.39 kg ∙ Temperature: 0℃ to 40℃ Operating ∙ Humidity: 20% to 90%, non-condensing Environment ∙ Altitude: 0 ~ 5000m ∙ Temperature: -20℃ to 60℃...
Preset Display Modes ⚠ Important All information is subject to change without prior notice. PRO MP2422C Standard Resolution HDMI™ D-Sub 640x480 @60Hz @67Hz @72Hz @75Hz Dos Mode 720x480 @60 Hz 720x576 @50Hz SVGA 800x600 @56Hz @60Hz @72Hz @75Hz 1024x768 @60Hz...
Troubleshooting The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer graphics card is properly installed. • Check if the computer and monitor are connected to electrical outlets and are turned on.
∙ Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. ∙ If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.
Page 20
California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: https://dtsc.ca.gov/perchlorate/ Environment ∙ To reduce the possibility of heat-related injuries or of overheating the device, do not place the device on a soft, unsteady surface or obstruct its air ventilators.
TÜV Rheinland Certification TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light.
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626) 913-0828 www.msi.com...
Page 23
Vietnam RoHS As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.