Table of Contents
Advertisement
INSTALLING YOUR OVEN ACCESSORIES (CONTINUED)
Left hand side rack
Shelves and trays
The shelves are designed so that they have maximum
extension but cannot be accidentally pulled right out.
To fit a shelf to side racks:
NOTE: To Locate the rear edge of the shelves, the detents
on the side wires should be towards the oven back wall.
See image.
1.
Rest the rear edge of the shelf on the lower guide rail
of the side rack - see diagram. Ensure the same rail
positions on both sides of the oven are being engaged.
2.
With the front edge raised, begin to slide the shelf in
between the guide rails of the side rack.
3.
Once the detents have passed the front edge of the
side rack, the shelf can be pushed fully in.
4.
When fully inserted the shelf should not interfere with
the closed oven door.
10
INSTALLING YOUR OVEN ACCESSORIES
To fit a shelf or tray to telescopic slides
1.
2.
3.
Detent
Push the shelf or tray along the top of the slide until it
hits the back post.
Drop the front of the shelf or tray onto the slide
ensuring it sits behind the front post of the slide.
When fully inserted the shelf/tray should not interfere
with the closed oven door.
Back post
Back post
Front post
Front post
Advertisement
Table of Contents
