Troubleshooting - Hunter 51384 Installation Manual

1886
Note:
Fan style may vary.
9
Reversing the Fan
Reverse
Switch
Ceiling fans work in two directions: downdraft and updraft.
To change the direction of air flow, turn the fan off and let
it come to a complete stop. The reversing switch is located
inside the light fixture. It can only be accessed when the glass
is removed. Slide the reversing switch to the opposite position.
Restart the fan.
Fan Doesn't Work
• Make sure power switch is on.
• Pull the pull chain to make sure it is on.
• Push the motor reversing switch firmly left or right to
ensure that it is engaged.
• Check the circuit breaker to ensure the power is
turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit breaker, then loosen
the canopy and check all the connections according
to the wiring diagram.
• Check the plug connection in the switch housing.

Troubleshooting

Excessive Wobbling
• Make sure the blades are properly installed on the
blade iron posts.
• Turn the power off, support the fan carefully, and
check that the hanger ball is properly seated.
• Use the provided balancing kit and instructions to
balance the fan.
Noisy Operation
• Make sure the blades are properly installed.
• Check to see if any of the blades are cracked. If so,
replace all of the blades.
Updraft (clockwise rotation)
creates a more indirect airflow.
Updraft airflow is great for
moving warm air downward.
Downdraft (counterclockwise
rotation) creates a direct breeze
and maximum cooling effect.
Hunter Pro Tip:
Cleaning the Fan
Use soft brushes or cloths to prevent scratching.
Cleaning products may damage the finishes.