Table of Contents
Advertisement
Starting the Engine
1.
Connect the spark-plug wire to the spark plug.
2.
Open the fuel valve
1. Fuel valve
3.
Move the throttle-control lever to the
Note:
Do nut use the choke when the engine is warm.
4.
Hold the blade-control bar against the handle (B of
5.
Pull the recoil-start handle (C of
Note:
When you pull the recoil-start handle, pull it lightly until you feel resistance, then pull it sharply.
Allow the rope to return to the handle slowly.
6.
When the engine starts, move the throttle-control lever to the
Note:
If the machine does not start after several attempts, contact an Authorized Service Dealer.
(Figure
16).
CHOKE
Figure
17).
Figure 16
position (A of
Figure
17).
Figure
17).
FAST
Figure 17
17
position (D of
Figure
17).
g024303
g412341
Advertisement
Table of Contents
