Table of Contents
Advertisement
NETWORKSETUP
8
Select the line »Select Access Point« with
»
« or »
« and press »OK« to confirm.
V
Λ
– P resent WPS-supported wireless networks
are scanned to display in the »Select Ac-
cess Point« menu.
9
Select the network that you want to connect
with »
« or, »
V
Λ
confirm.
– 8 -digit pin code is displayed in the wire-
less WPS menu.
Note:
Refer to the manual of your router to find
7
out how the PIN is entered via a PC.
10
Use a PC to enter the pin on the router (e.g.
AVM FRITZ!Box: menu item WLAN Set-
tings... WPS) and save.
Note:
The 8-digit PIN code must be entered in the
7
modem interface in 2 minutes; otherwise,
connection of television with the modem is
cut.
11
Press »
« (green) to confirm the registra-
tion.
– T he message "Connection to Gateway:
Success" appears.
12
Press »
« (green) to check the performed
settings and also if the local network and
internet connection has been established.
– » Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Successfull«, »Internet Connection: Suc-
cessfull« messages and MAC address will
be displayed.
13
Press »EXIT« to end the setting.
86
ENGLISH
- ------------------------------------------------------------------------------------------
« and press »OK« to
Connectingautomaticallybyentering
thenetworkpassword
Use this method for establishing a connection
if your router does not support "WPS-PBC" or
WPS PIN entry.
1
Open the menu with »MENU«.
2
Select menu item »Settings« with »
<
>
»
« or »
« and press »OK« to confirm.
3
Select the menu item »Network« with »
<
»
« and press »
V
– » Network« menu is active.
Settings > Network
Picture
Sound
Source
Change Connection Type
Network Configuration
Wake-on-LAN
Advanced
Connec
Test Connection
Change Area
4
Select the line »Change Connection Type«
with »
« or »
« and press »OK« to
V
Λ
confirm.
5
Select the option »Wireless« with »
»
« and press »OK« to confirm.
Λ
– W iFi warning message will be displayed.
6
Confirm the message »Do you want to turn
on Wi-Fi?« select »Yes« with »
press »OK« to confirm.
7
Select the line »Network Configuration«
with »
« or »
« and select the option
V
Λ
<
»AUTO« with »
« or »
8
Select the line »Select Access Point« with
»
« or »
« and press »OK« to confirm.
V
Λ
– » Select Access Point« menu is displayed
by scanning available wireless networks.
9
Select the network that you want to con-
nect with »
« or »
V
confirm.
– W ireless connection password screen is
displayed.
«, »
V
Λ
>
« to confirm.
Tuesday
xx xxx xxxx
TV
Network
Timer
Parental
Wired
AUTO
Off
Select
BACK
« or
V
<
>
« or »
« and
>
«.
« and press »OK« to
Λ
«,
« or
Back
Advertisement
Table of Contents
