Receiving Digital Stations; Grundig Scr System; Important Notes On Environmental Protec- Tion; Notes On Still Images - Grundig 43 VLX 7710 BP User Instructions

GENERAL­INFORMATION
Receiving­digital­stations
To receive digital satellite stations (DVB-S) you
7
need a satellite antenna.
To receive digital stations (DVB-T) you need
7
a digital rooftop or indoor antenna (passive
or active indoor antenna with its own power
supply).
T he antenna cable of the cable TV network
7
that broadcast in DVB-C must be plugged into
TV in order to receive the DVB-C broadcasts.
Unlike analogue broadcasting, not every
7
station has its own transmission frequency.
Instead, several stations are grouped into
what are known as bouquets on a regional or
national level.
You can find the current transmission informa-
7
tion on teletext from various broadcasters, or
look in a TV guide or on the Internet.
Various digital television stations from private
7
broadcasters are encrypted (DVB-S, DVB-T
and DVB-C). Watching these stations and the
recording and playback functions are only
possible with the appropriate CI module and
a SmartCard. Ask your specialist dealer.
GRUNDIG­SCR­System
Your TV supports SCR system (Single Channel
Router). With SCR satellite system, several us-
ers can individually receive all signals from the
satellite simultaneously.
8­ ENGLISH
­ - ------------------------------------------------------------------
Important­notes­on­environmen-
tal­protection
Those items mentioned below will help you
reduce the consumption of natural resources as
well as save your money by reducing electricity
bills.
If you will not be using the TV set for several
7
days, it should be disconnected from the
mains for environmental and safety reasons.
TV will not consume energy in this condition.
If the TV set has main switch, it will be enough
7
to turn the TV off via main switch. TV will
reduce energy consumption almost to Zero
Watt.
TV consumes less energy on stand by mode.
7
However, some TV sets may have features
such as on timer, that require the TV set to be
left in standby to work correctly.
TV consumes less energy when brightness is
7
reduced.
Notes­on­still­images
Watching the same image for a long time on the
screen may cause a still image remain feebly on
the background. Feeble image(s) on the back-
ground is originated from LCD/LED technology
and does not require any action under guaran-
tee. To avoid such cases and/or minimize the
impact, you may observe the tips below.
Do not allow the same TV channel to stay on
7
the screen for a very long time. Channel logos
may cause this situation.
Do not allow the images, which are not full
7
screen, to constantly stay on the screen; if not
streamed in full screen format by the broad-
caster, you can convert the images to full
screen by changing picture formats.
Higher brightness and/or contrast values will
7
lead this impact to appear faster; therefore,
you are recommended to watch your TV in
the lowest brightness and contrast levels.