Connecting External Data Media - Grundig 32 GEH 6600B User Manual

USB­PROCESS
Connecting­external­data­media
It is advised to put the television on stand-by
mode before connecting the External Data
medium. Connect the device and then switch the
television on again.
Before disconnecting the data medium, the
television must first be switched to standby,
otherwise files can be damaged.
Notes:
If you are using a power cable for the
7
external hard disk that you have connected
to the USB­(HDD) USB interface, then the
power cable of the external hard disk must
also be unplugged when the TV is turned
off.
You must not disconnect the USB Device
7
from the TV while a file on the USB Device
is being read by the TV.
A bi-directional data transfer as defined for
7
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
USB transfer is not an operating mode in
7
itself. It is only an additional function.
I f the product cannot be recovered in the
7
data playing/sharing/recording mode due
to electrostatic discharge, user intervention
will be required.
­-----------------------------------------------------------------------------------------------------
USB2
(HDD)
1­
Connect the USB­(HDD) interface of the
television and the corresponding socket on
the data device (external hard drive, digital
camera, card reader or MP3 player) using
a USB cable;
ENGLISH
43­