CONNECTION/PREPARATION
Settinguporhanging
S elect a location so that no direct sunlight falls
7
on the screen.
Settingupwithstand
T o mount the stand, refer to the installation
7
instructions included.
P lace the TV set on a hard, level surface.
7
InstallationpreparationforVESA
installationkit
Contact authorised dealer to purchase the
bracket.
You will need the following:
A pair of scissors,
7
A cross-tip screwdriver.
7
Follow the installation instructions for the VESA
installation kit.
1
Place the TV set in the film on a smooth
surface with the screen facing down.
2
Cut open the film on the back side using the
scissors.
3
Connect the required cables to the
connectors on the TV set. See the
"Connections" section in this manual.
4
Tie the cables so they do not hang down
onto the floor.
5
Screw the VESA bracket onto the TV set
and mount it according to its installation
instructions.
-----------------------------------------------------
VESA
ENGLISH
11