Connecting External Data Media; Settings For Usb Recording - Grundig 22 VLE 5520 BN User Instructions

USB­RECORDING
Connecting­external­data­media­
Notes:
Before connecting the external data medium
7
it is recommended to switch the television to
stand-by mode.
Before removing the external data medium,
7
the television must be switched to standby,
so that no data loss occurs.
Your television features two USB sockets,
7
»USB«.
»USB« is used to connect data m edia,
which require an additional power supply.
– for example, external hard disks.
1 Connect the »USB« socket of the t elevision
and the corresponding socket of the data
medium (external hard disk) using a USB ca-
ble;
­ - -------------------------------------------------------------------------------------------------------------
Notes:
If you use a network cable for external hard
7
disks which have been connected to the
»USB« socket of the television, this network
cable must also be disconnected from the
power supply when the television is switched
off.
External data media may not be disconnect-
7
ed from the television while files on the data
medium are being accessed.
Settings­for­USB­recording
Selecting­the­menu
1 Open the menu with »MENU«.
2 Select the menu item »USB RECORDING«
with »
– T he »USB RECORDING« menu appears.
« or » « and press »OK« to confirm.
V Λ
USB RECORDING
PRnP
Auto Preview
Permanent Timeshift
Manage data medium
Safely Remove Disk
Disk
Capacity Used
Used (MB)
Total (MB)
Exit
Back
08.08.2012
15:46
OK
On
On
USB
%3
1249
38145
­ 2 9
ENGLISH