Table of Contents
Advertisement
For 2242, 2260 length
A.
B.
C.
•
•
4.
Remove the plastic film from the thermal pad(s) on the bottom of the heatsink(s).
If the thermal pad on the M.2 heatsink becomes damaged and needs to replaced, we
recommend replacing it with a thermal pad with a thickness of 1.25mm.
5.
Replace the heatsink(s).
6.
Secure the heatsink(s) using the screws removed previously.
1-14
Install the bundled screw stand to the M.2 length screw hole you wish
to install your M.2 to.
Install your M.2 to the M.2 slot.
Secure your M.2 using the bundled screw stand's screw.
B
B
This M.2 rubber pad is optional for when installing a single sided M.2 storage device.
Ensure to install the bundled M.2 rubber pad before installing your single sided M.2
storage device.
DO NOT install the bundled M.2 rubber pads when installing a double-sided M.2
storage device. The rubber pad installed by default is compatible with double sided
M.2 storage devices.
A
C
A
C
Chapter 1: Product Introduction
Advertisement
Table of Contents
