Asus TUF GAMING B760M-BTF WIFI D4 Manual page 14

•
•
The M.2 SSD module is purchased separately.
7. SATA 6Gb/s ports
The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and
hard disk drives via SATA cables.
8. USB 3.2 Gen 2 Type-C
The USB 3.2 Gen 2 Type-C
3.2 Gen 2 Type-C
port on the front panel. The USB 3.2 Gen 2 Type-C
data transfer speeds of up to 10 Gb/s.
The USB 3.2 Gen 2 Type-C
9. USB 3.2 Gen 1 header
The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen 1
module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1
header provides data transfer speeds of up to 5 Gb/s.
The USB 3.2 Gen 1 module is purchased separately.
10. USB 2.0 headers
The USB 2.0 headers allow you to connect USB modules for
additional USB 2.0 ports. The USB 2.0 headers provide data
transfer speeds of up to 480 Mb/s.
DO NOT connect a 1394 cable to the USB connectors. Doing
so will damage the motherboard!
The USB 2.0 module is purchased separately.
11. Addressable Gen 2 headers
The Addressable Gen 2 headers allow you to connect individually addressable
RGB WS2812B LED strips or WS2812B based LED strips.
The Addressable Gen 2 headers support WS2812B addressable RGB LED strips (5V/Data/
Ground), with a maximum power rating of 3A (5V), and the addressable headers on this
board can handle a combined maximum of 500 LEDs.
1-4
Intel 13 & 12 Gen Processors
® th th
M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
Intel B760 Chipset
®
M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
M.2_3 slot (Key M), type 2280 only (supports PCIe 4.0 x4 mode)
The M.2_3 slot shares bandwidth with the PCIEX16(G4) slot. When you install a
device into the M.2_3 slot, the PCIEX16(G4) slot will be disabled.
Front Panel connector
®
connector allows you to connect a USB
®
module for an additional USB 3.2 Gen 2 Type-C
®
®
connector provides
®
module is purchased separately.
CC2
®
D+
D-
GND
RX2-
RX2+
GND
TX2-
TX2+
VBUS
GND
IntA_P1_D+
IntA_P1_D-
GND
IntA_P1_SSTX+
IntA_P1_SSTX-
GND
IntA_P1_SSRX+
IntA_P1_SSRX-
USB3+5V
PIN 1
USB_78 USB_56
PIN 1
ADD_GEN 2
PIN 1
Chapter 1: Product Introduction
VBUS
TX1+
TX1-
GND
RX1+
RX1-
VBUS
CC1
NC
NC
IntA_P2_D+
IntA_P2_D-
GND
IntA_P2_SSTX+
IntA_P2_SSTX-
GND
IntA_P2_SSRX+
IntA_P2_SSRX-
USB3+5V
PIN 1