JUKI TL-15 Instruction Manual page 33

Introduction of optional parts
CAUTION:
■ Compensating presser foot
Screw in the
presser foot
CAUTION:
■ 1/4" (7 mm) presser foot
Screw in the
presser foot
Turn OFF the power switch when replacing the presser foot.
Presser foot
Guide
Turn OFF the power switch when replacing the presser foot.
Presser foot
Guide
It is convenient to sew material end straight.
1
Install the compensating presser foot.
2
Fit material end to guide and sew.
Guide for 1/4" (7mm) seam allowance for piecing is pro-
vided.
1
Install the 1/4" (7mm) presser foot.
Loosely attach presser foot setscrew. Then, attach
the 1/4"(7mm) presser foot and securely tighten
the setscrew.
2
Sew the material while aligning its edge
with the guide.
Stitches can be sewn at the position which is 1/4"
(7mm) away from the guide.
31