Engine F/W Control Algorithm; Feeding; Transfer - Samsung Xpress C1810 Series Service Manual

2. Product specification and description

2.2.6. Engine F/W Control Algorithm

2.2.6.1. Feeding

If feeding from a cassette, the drive of the pickup roller is controlled by controlling the solenoid. The on/off of the
solenoid is controlled by controlling the general output port or the external output port. While paper moves, occurrence
of Jam is judged as below.
Item Description
After picking up, paper entered but it cannot reach to the feed sensor in predetermined period of
Jam in Tray 1 •
time. due to slip, etc.
After picking up, if the feed sensor is not on, re-pick up. After re-picking up, if the feed sensor is
•
not on after certain time, it is JAM 0.
Even though the paper reaches to the feed sensor, the feed sensor doesn't be ON.
•
After the leading edge of the paper passes the feed sensor, the trailing edge of the paper cannot pass
Jam inside •
the feed sensor after predetermined period of time.
machine
After the leading edge of the paper passes the feed sensor, the paper cannot reach the exit sensor
•
after predetermined period of time.
* The paper exists between the feed sensor and the exit sensor.
Jam in Exit After the trailing edge of the paper passes the feed sensor, the paper cannot pass the exit sensor predetermined
area period of time.

2.2.6.2. Transfer

The charging voltage, developing voltage and the transfer voltage are controlled by PWM (Pulse Width Modulation). The
each output voltage is changeable due to the PWM duty. The transfer voltage admitted when the paper passes the transfer
roller is decided by environment conditions. The resistance value of the transfer roller is changed due to the surrounding
environment or the environment of the set, and the voltage value, which changes due to the environments, is changed
through AD converter. The voltage value for impressing to the transfer roller is decided by the changed value.
2-30 Copyright© 1995-2017 SAMSUNG. All rights reserved.