Bridged - D-Link DSL-G2452DG User Manual

Section 4 - Configuration
Select Bridge to configure the device as a network bridge.
IPv4 Settings:
My Internet
Select Bridged.
Connection is:
LAN Interface:
Choose the interface to bridge.
Advanced Settings
MTU
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP. Select either Auto or Manual.
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP. This
Server:
address is usually obtained automatically from your ISP.
Enable NAT:
Enable or disable Network Address Translation.
Bridged Mode does not support IPv6 configuration. Click Save when you are done.
D-Link DSL-G2452DG User Manual

Bridged

IPv4 SETTINGS
⌵ ⌵
My Internet Connection is: Bridge
⌵ ⌵
LAN Interface: LAN 1
⌵ ⌵
MTU: Auto
Advanced Settings ...
36