D-Link DSL-G2452DG User Manual page 39

Section 4 - Configuration
Advanced Settings
Address Mode:
Select Static IP if your ISP assigned you an IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
IP Address:
Enter the IP address provided by your ISP. Static IP only.
Service Name:
Enter the ISP service name (optional).
Primary DNS
Enter the primary DNS server IP address assigned by your ISP. This
Server:
address is usually obtained automatically from your ISP.
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP. This
Server:
address is usually obtained automatically from your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Enable NAT:
Enable or disable Network Address Translation.
Proceed to IPv6 Settings on page 37 or click Save when you are done.
D-Link DSL-G2452DG User Manual
PPPoE (Cont)
35