Gigabyte GA-686DX User Manual page 57

GA-686DX
The board installed is not responding to the ID request, or no board ID has been
found in the indicated slot.
F
When this error appears, the system will boot in ISA mode, which allows
you to run the EISA Configuration Utility.
Ö
Slot Not Empty
Indicates that a slot designated as empty by the EISA Configuration Utility
actually contains a board.
F
When this error appears, the system will boot in ISA mode, which allows
you to run the EISA Configuration Utility.
Ö
SYSTEM HALTED, (CTRL-ALT-DEL) TO REBOOT ...
Indicates the present boot attempt has been aborted and the system must be
rebooted. Press and hold down the CTRL and ALT keys and press DEL.
Ö
Wrong Board In Slot
PLEASE RUN EISA CONFIGURATION UTILITY
The board ID does not match the ID stored in the EISA non-volatile memory.
F
When this error appears, the system will boot in ISA mode, which allows
you to run the EISA Configuration Utility.
A-5