Gigabyte GA-686DX User Manual page 27

GA-686DX
HEADS number of heads
PRECOMP write precomp
LANDZONE landing zone
SECTORS number of sectors
If a hard disk has not been installed select NONE and press <Enter>.
·
Drive A type / Drive B type
The category identify the types of floppy disk drive A or drive B that has been
installed in the computer.
None
360K, 5.25 in.
1.2M, 5.25 in.
720K, 3.5 in.
1.44M, 3.5 in.
·
Floppy 3 Mode Support (for Japan Area)
Disable Normal Floppy Drive.
Drive A Drive A is 3 mode Floppy Drive.
Drive B Drive B is 3 mode Floppy Drive.
Both Drive A & B are 3 mode Floppy Drive.
·
Video
The category detects the type of adapter used for the primary system monitor
that must matches your video display card and monitor.
Although secondary monitors are supported, you do not have to select the type
in setup.
No floppy drive installed
5-1/4 inch PC-type standard drive; 360 kilobyte
capacity.
5-1/4 inch AT-type high-density drive; 1.2 megabyte
capacity (3-1/2 inch when 3 Mode is Enabled).
3-1/2 inch double-sided drive; 720 kilobyte capacity
3-1/2 inch double-sided
capacity.
4-7
drive; 1.44 megabyte