Draining The Water Tank; Cleaning The Filter Drawer - Beko DPS 7205 GB5 User Manual

Maintenance and cleaning
C
Clean metal surfaces of the
sensors 4 times a year.
Do not use metal tools when
C
cleaning metal surfaces of the
sensors.
A
Never use solvents, cleaning
agents or similar substances for
cleaning due to the risk of fire and
explosion!

6.3 Draining the water tank

Dampness of the laundry is removed and
condensed during drying process and the
water that arise accumulates in the water
tank. Drain the water tank after each drying
cycle.
A
Condensed water is not drinkable!
A
Never remove the water tank
when the program is running!
If you forget to drain the water tank, the
machine will stop during the subsequent
drying cycles when the water tank is full and
the Water Tank warning symbol will flash.
If this is the case, drain the water tank and
press Start / Pause button to resume the
drying cycle.
Dryer / User Manual
To drain the water tank:
Pull the drawer and remove the water tank
carefully.
• Drain the water in the tank.
• If there is lint accumulation in the funnel
of the water tank, clean it under running
water.
• Place the water tank into its seat.
C
If the direct water draining is used
as an option, there is no need to
empty the water tank.

6.4 Cleaning the filter drawer

Lint and fiber that could not be captured
by the lint filter are blocked in the filter
drawer behind the kick plate.
filter periodically when there is visible air
collection on it or when the symbol lights up,
if there is a filter drawer cleaning warning
symbol « » available.
There is an one stage filter. This one stage
filter is from sponge
Clean the
57 / EN