Kenmore 415.30810800 Use And Care Manual page 13

ASSEMBLY – Modelo No. 415.30810800
Left Leg
1 '
Place one upper leg as shown . NOTE: Left front and left back legs do not have leg extenders. In front, attach upper leg, side
brace and left front leg (curve) with #10-24x1-1/4" screw and #10-24 flange nut. In back, attach upper leg, side brace and left
back leg (straight) with #10-24x1-1/4" screw and #10-24 flange nut. Do not tighten.
'
Attach support bracket in second hole from bottom of leg with hinge pins and hitch pins (A).
11
Hitch Pin
Qty: 2
Left Front Leg
(Curve)
10
Hinge Pin
Qty: 2
Right Leg
2
'
Place other upper leg as shown. Attach upper leg and right front leg (curve) with #10-24x1-1/4" screw and #10-24 flange nut.
Then attach upper leg and right back leg (straight) with #10-24x1-1/4" screw and #10-24 flange nut . Do not tighten .
'
Attach support bracket with #10-24x1-1/4" screws and #10-24 flange nuts.
#10-24 Flange Nut
Qty: 4
12
#10-24x1-1/4"
Screw
Qty: 4
Leg Extender
13
13
Left Back Leg
(Straight)
11
Right Front Leg
Right Back Leg
(Curve)
(Straight)
Upper Leg
12
10
A
13
12
#10-24x1-1/4"
Screw
Qty: 2
13
#10-24 Flange Nut
Qty: 2
Upper Leg
12
466810608 • 13