Lenovo L27e-40 User Manual page 27

Installing the display driver in Windows 11
To use the Microsoft Windows 11 Plug and Play feature, do the following steps:
1. Turn off the power to the computer and all connected devices.
2. Make sure the display is properly connected.
3. Power on the display, and then power on the system unit. Let the computer start the Windows 10
operating system.
4. Find the corresponding display driver from the Lenovo website http://support.lenovo.com.cn/ and
download it to the PC to which the display is connected (e.g. desktop).
5. Open the Display Properties window as follows: Click the Start, Control Panel, Hardware, and Sound
icons, and then click the Display icon.
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8. Click the Display tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, and then click "Browse the computer to find the driver program".
12. Select "Pick from the list of device driver programs on the computer".
13. Click the Hard Disk button. Click the Browse button to browse and open the following path: X:\Monitor
Drivers\Windows 10
(where X means "the folder where the downloaded driver is located" (e.g. desktop)).
14. Select the " lenL27e-40.inf " file and click the Open button. Click the OK button.
15. In the new window, select LEN L27e-40, and then click Next.
16. When the installation is complete, delete all downloaded files and close all windows.
17. Reboot the system. The system will automatically select the maximum refresh rate and the
corresponding color matching profile.
Note: Unlike CRTs, LCD displays do not improve display quality by increasing the refresh rate. Lenovo
recommends using a 1920x1080@100Hz refresh rate.
Get further help
If you are still unable to resolve the issue, please contact Lenovo Support. For more information on
contacting the Support Center, see "Appendix A. Service and Support" on page A-1.
Chapter 3. Reference Information 3-6