Samsung N5200 E-Manual page 90

The problem
The Broadcasting function
has been deactivated.
PIP is not available.
The settings are lost after
5 minutes or every time the
TV is turned off.
A POP (TV's internal banner
ad) appears on the screen.
The TV is making a popping
noise.
The TV is making a
humming noise.
The software update over
the Internet has failed.
Broadcasting is only available when the
Broadcasting cannot be accessed while you watch TV using a cable box or satellite box.
PIP is available only when an external device is connected with an HDMI or Component
cable.
Note that the function is unavailable when Smart Hub is active.
" This function may not be supported depending on the model or geographical area.
If Usage Mode is set to Retail
reset every 5 minutes.
Change Usage Mode to Home
● Settings General
Change Usage Mode to Home
●
Settings General
The expansion and contraction of the TV's outer casing may cause a popping noise.
This does not indicate a product malfunction.
The TV is safe to use.
Your TV utilizes high-speed switching circuits and high levels of electrical current.
Depending on the TV's brightness level, the TV may seem slightly noisier than a
conventional TV.
Your TV has undergone strict quality control procedures that meet our demanding
performance and reliability requirements.
Some noise coming from the TV is considered normal and is not an acceptable cause for an
exchange or refund.
Check the network connection status.
● Settings General
If the TV is not connected to a network, connect it to a network.
The upgrade stops if you already have the latest software version.
Try this!
Source is set to TV.
Mode, the TV's audio and video settings are automatically
Mode.
System Manager
Mode.
System Manager
Network Network Status
- 90 -
Usage Mode
Usage Mode