Table of Contents
Advertisement
Problem solving guide
With the help of the following notes minor faults in the performance of the appli‐
ance, some of which may result from incorrect operation, can be put right without
contacting the Service Department.
Repair work to electrical appliances must only be carried out by a suitably
qualified person in strict accordance with current local and national safety regu‐
lations. Repairs and other work by unqualified persons could be dangerous.
The manufacturer cannot be held liable for unauthorised work.
Check indicators and fault messages
Problem
The programme is can‐
celled, lights up
flashes/lights up af‐
ter the tumble dryer has
been switched on and a
programme cannot be
selected
and (e.g. )
light up after a pro‐
gramme has been can‐
celled
44
Cause and remedy
This is not a fault.
In some programmes, if the drum has been underloa‐
ded or is empty, the programme will be cancelled.
This can also happen if the items are already dry.
Open and close the door to resume drying.
Dry individual items using the Warm air timed dry‐
ing programme.
Access via a code has been activated.
See "Programmable functions - Code".
No obvious cause.
Switch the dryer off and then on again.
Start a programme.
If the programme is cancelled again and an error
message appears, there is a fault. Contact the Miele
Service Department.
Advertisement
Table of Contents
