Table of Contents
Advertisement
Section 3 - Configuration
Enable E-mail
Enable this option if you want the logs to be automatically
Notification
sent to an email address.
If you enable Enable E-mail Notification, configure the following:
From E-mail Address
Enter the sender's email address of the SysLog messages.
To E-mail Address
Enter the recipient's email address.
SMTP Server Address
Enter the SMTP server address.
SMTP Server Port
Enter the SMTP server port. The default is 25.
Enable Authentication
Enable this if your SMTP server requires authentication.
Account Name
Enter your SMTP account name.
Password
Enter your SMTP account's password.
E-mail Log When Full or On Schedule
Send When Log Full
If enabled, this option will set the router to send the log when
the log buffer is full. The email account for sending logs is
configured in the above section.
Send on Schedule
If enabled, this option will set the router to send the log
according to a set schedule periodically, so the administrator
is always up to date on the operation of the router. The email
account for sending logs is configured in the above section.
Schedule
If you enable Send On Schedule, use the drop-down menu to
select a schedule to apply. The schedule may be set to Always
Enable, or you can create your own schedules in the Schedules
section. Refer to Time & Schedule - Schedule on page 77
for more information.
D-Link G403 User Manual
Email Settings
79
Advertisement
Table of Contents
