Table of Contents
Advertisement
Section 3 - Configuration
Go to Settings > Network to change the local network settings of the router and configure the DHCP settings.
Click Save at any time to save the changes you have made on this page.
LAN IP Address
Enter the IP address of the router. The default IP address is
192.168.0.1. If you change the IP address, you will need to
enter the new IP address in your browser to log in to the web
configuration.
Subnet Mask
Enter the subnet mask of the router. The default subnet mask
is 255.255.255.0.
Management Link
The default address to access the router's configuration is
http://G403-xxxx.local/ (where xxx represents the last 4 digits
of your router's MAC address). You can replace G403-xxxx with
a name of your choice.
Local Domain Name
Enter the domain name (optional).
Enable DNS Relay
Disable this option to transfer the DNS server information from
your ISP to your computers. If enabled, your computers will
use the router's settings for DNS service.
D-Link G403 User Manual
Network Settings
Network
G403-BD3A
51
Advertisement
Table of Contents
