Table of Contents
Advertisement
Section 3 - Configuration
Advanced Settings... - Address Autoconfiguration Settings
Enable Automatic
Enable or disable the Automatic IPv6 Address Assignment
IPv6 Address
feature.
Assignment
Enable Automatic
If DHCP-PD is enabled in the previous LAN IPv6 Address
DHCP-PD in LAN
Settings, enable or disable automatic DHCP-PD for other IPv6
routers connected to the LAN interface.
Autoconfiguration
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful
Type
DHCPv6.
If you select SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router
Enter the router advertisement lifetime (in minutes). The
Advertisement
default is 30 minutes.
Lifetime
If you select Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address
Enter the start IPv6 address for the DHCP server's IPv6
Range (Start)
assignment.
IPv6 Address
Enter the end IPv6 address for the DHCP server's IPv6
Range (End)
assignment.
D-Link G403 User Manual
40
Advertisement
Table of Contents
