Product Description; Technical Details - Marco 164 404 15 Instructions For Use Manual

Self-priming gear pump, integrated check valve and electronic pressure sensor: to be used
as automatic pump for water systems. Nickel-plated brass body, PTFE gears, stainless-steel
shaft and lip seal. The electronic pressure sensor is preset at 5 bar.
Tab.1 EN
CODE TYPE
164 404 15 UP10/E
There are numerous fields of applications for the pump, however only exclusively with the
allowed liquids mentioned:
Ø
Main use as automatic pump for freshwater and sanitary water systems on
boats, camper
FLUIDS ALLOWED / NOT ALLOWED
Tab.2 EN
WARRANTY EXPIRES IF MAX FLUID
TEMPERATURE IS EXCEEDED
FRESH WATER (max 40 °C-104 °F)
OK
SEA WATER
PETROL (GASOLINE)
NO
FLAMMABLE LIQUIDS with PM< 38 °C-100 °F
LIQUIDS WITH VISCOSITY > 20 cSt
FOODSTUFF LIQUIDS
CORROSIVE CHEMICAL PRODUCTS
SOLVENTS

PRODUCT DESCRIPTION

TECHNICAL DETAILS

FUSE
VOLT
12
A 25
24
* Internal tube Ø 13 mm / ** Length up to 2 m
IP 67 Protection
APPLICATIONS
LIQUIDS
FKM Lip Seal
ISO 8846 Compliant Device
©
FLOW RATE * PRESSURE
l/min 18 bar
gpm 4,8 psi
13
S.p.A.
WEIGHT WIRE SIZE **
5 kg 4,3 mm²
73 lb 9,5 AWG
DANGERS
•
•
•
•
• •
•
ENG
4
12
•