Figure 13. Disconnect the I/O board cable from the system board and remove three screws
Screw specifications
M2.5 x L4
Step 2.
Open the hinge. Remove one screw and then remove the I/O board with cable.
Figure 14. Remove the I/O board with cable
Screw specifications
M2 x L3
Step 3.
Separate the I/O board cable from the I/O board.
Figure 15. Remove the I/O board
Number of screws
3
Number of screws
1
.
Chapter 4
Removing a FRU or CRU
39