Remove The Battery Pack; Screw Specifications Number Of Screws - Lenovo Slim Pro 7i Hardware Maintenance Manual

Screw specifications
M2 x L7
M2 x L3.5
Step 3. Pry up the latches and then remove the lower case.
Figure 3. Pry up the latches and remove the lower case
Go to
https://support.lenovo.com/partslookup
part:
Lower case

Remove the battery pack

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 26
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Remove three screws and then remove the battery pack.
Number of screws
2
4
to look up the Lenovo part number of the following replacement
.
Chapter 4 Removing a FRU or CRU
27