Steam Generation System; Oven Light - Electrolux B9820-5-M User Manual

Fitted fan/steam cooking oven
Table of Contents

Advertisement

42
Cleaning and Care
Replace the side rails
1. Set the rails in the rear attachment and press
into the griip on the side (1).
2. Insert the screw and tighten (2).

Steam generation system

1
Important: Wipe the steam generator dry after each use. Soak up water with a sponge.
3
Remove any lime residue with water and vinegar.
1
Important: Chemical descaling agents can damage the oven's surface enamel. Always
follow the manufacturer's instructions exactly.
Water Drawer and Steam Generator
1. Pour water and vinegar (about 250 ml) into the
steam generator via the water drawer.
Leave to work for approx. 10 minutes.
2. Remove the water and vinegar with a non-
abrasive sponge.
3. Rinse out the steam generation system
through the water drawer using clean water
(100-200 ml).
4. Soak up remaining water from the steam gen-
erator with the sponge and wipe dry.
5. Leave the oven door open to let the oven dry
out completely.

Oven Light

1
Danger of electrocution! Before replacing the oven light bulb:

Advertisement

Table of Contents
loading

Table of Contents