Error Messages - Dell VxRail VP-760 Manual

Error messages

The error messages that are displayed on the screen during POST or captured in the system event log (SEL), or LifeCycle (LC)
log.
The following table describes the details of the error message HWC8010:
Error code HWC8010
Message The System Configuration Check operation that is resulted in the following
issue involving the indicated component type
Arguments Riser, floating card (fPERC, adapter PERC, BOSS), backplane, processor, cable, or other components
Detailed Description The issue that is identified in the message is observed in the System Configuration Check operation.
Recommended Do the following and retry the operation:
Response Action
1. Disconnect the input power.
2. Check for proper cable connection and component placement. If the issue persists, contact the
Category System Health (HWC = Hardware Config)
Severity Critical
Trap/EventID 2329
The following table describes the details of the error message HWC8011:
Error code HWC8011
Message The System Configuration Check operation that is resulted in multiple
issues involving the indicated component type
Arguments Riser, floating card (fPERC, adapter PERC, BOSS), backplane, processor, cable, or other components
Detailed Description Multiple issues are observed in the System Configuration Check operation.
Recommended Do the following and retry the operation:
Response Action
1. Disconnect the input power.
2. Check for proper cable connection and component placement. If the issue persists, contact the
Category System Health (HWC = Hardware Config)
Severity Critical
50 Configuration information
service provider.
service provider.