Speaker Connection - Power Acoustik PML-43HB Owner's Manual

Speaker Connection

We recommended using car speaker with
minimum 40 Watt potential.
Headunits potential power may result in
damaging your OE speakers at higher
volumes.
Use 4Ω -8Ω (Ohm impedance) speakers
only; using higher or lesser impedance may
damage the headunit.
Speaker cables and / or optional external
power amplifiers must always be about
30cm away from the antenna and / or
antenna extension parts.
Do not connect the speaker leads of the
power harness to battery; otherwise, the
unit will be seriously damaged.
Before connecting the speaker leads the
harness to the speakers, check the speaker
wiring in your car.
Diagram：
16 Pin Harness
U1. Ground (Black)
U2. Steer Wheel Control 2 (Green)
U3. Back Camera Control (Pink)
U6. Ampli er Control
(Blue/White)
U5. Brake Detect (Brown)
U4. Steer Wheel Control 1 (Gray)
Connect the speakers according the following
diagram,incorrect connections will damage
the headunit or your vehicle's speakers.
White
Green
FL RL V-OUT
R-CAM
FR RR
Color
A
1
2 1
2 1
2
4 3 4 3
3
6 5 6 5
Yellow
4
8 7 7
8
5 Blue
Orange
6
Red
7
Black
8
Fuse: Max.15 Ampere
Voltage: 12V DC; Negative Ground
3
White
White
Yellow
MIC
ANT
External Microphone
Yellow
Red
Red
Function
B
1
NC
NC
2
NC 3
Battery +
4
ANT 5
Illumination
6
ACC
7
Ground
8
Wiring:
Grey
Purple
Line-out（FL)
Line-out（RL)
Line-out（V-OUT)
Radio Antenna
Line-out（Rear-Camera)
Line-out（RR)
Line-out（FR)
Function
Color
Purple(+)
Rear Right
Purple/Black(-)
Gray(+)
Front Right
Gray/Black(-)
White(+)
Front Left
White/Black(-)
Green(+)
Rear Left
Green/Black(-)