TABLE OF CONTENTS Table of Contents…………………………………….…………….………………………..1 Safety Information………………………………………………….………………………2 Features…………………………………………………………….………………………3 Accessories……………………………………….…….………………………………….4 Wire Connection……………...……………………………..……………………………….5 Unit Installation and Removal………………………….….………………………………8 Front Panel………………………………………………………..…..……………………12 Base Panel.………………………………………………………..…..……………………13 Remote Control……………………………………………………………………………14 Touch Screen Operations………………………………………………….……………19 Touch Screen Calibrate…………………………………….………………………19 Main Menu…………………………………………………….………………………20 Radio Operations…………………………………………………….……………….21 DVD Operations…………………………………………………….……………….22 iPod Operations…………………………………………………….………………..27 SD Operations……………………………………………………….………………..28 USB Operations…………………………………………………….………………..28 AV IN Operations…………………………………………………….………………29 AUX Operations…………………………………………………….………………29 NAVI Operations…………………………………………………….…………….…30...
SAFETY INFORMATION Please read the manual carefully before operating this unit and keep it for future reference. CAUTION: This unit is a class 1 laser product. To prevent direct exposure to the laser system, do not open the unit. The laser beam may hurt your eyes. If the unit requires adjustments, contact an authorized service centre.
ACCESSORIES Bolt x 1 Back Strap x 1 M5X5 Screws x 4 Power Wire x 1 Connecter Wire x 1 Connecter Wire x 1 Operational Manual x (White) (Yellow) Trim Bezel x 1 Mounting Sleeve x 1 Remote Control x 1 USB Cable x 1 Faceplate Case x 1 Keys x 2...
WIRE CONNECTION 1. RADIO & ANALOG TV ANTENNA (OPTIONAL) 2. 15PIN SOCKET 3. AUDIO /VIDEO OUTPUT & INPUT 4. NAVI & DIGITAL TV ADAPTER (OPTIONAL) 5. IPOD ADAPTER - 5 -...
Page 7
Brake Control Connect the brake control wire AUTO_ANT (see Wiring Diagram). It is necessary to connect the Brake Control wire to the Hand-brake switch of the car. While driving, the TFT monitor will display the alarm picture (see as follows) in order to ensure the safety.
UNIT INSTALLATION AND REMOVEL Installation Method 1: 1 Install the mounting sleeve 2 Bend the claws into place into the dashboard. to secure the sleeve. 3 Slide the units into the mounting sleeve. 4 Install the trim bezel onto the unit. 5 Install the face panel onto the unit.
Page 10
Removal Method 1: 1 Detach the face panel by 2 Detach the trim bezel. pushing the release button. 3 Insert the keys into the aperture 4 Pull the unit out of the mounting sleeve. between the unit and the mounting sleeve to release the internal locks.
Page 11
Installation Method 2: 1 Tighten the bolt onto the rear 2 Tighten the back strap onto your panel of the unit. car inside the dashboard. 3 Place the unit into the dashboard; 4 Screw the unit on the car on the make the bolt bar across back strap;...
Page 12
Removal Method 2: 1 Detach the front panel by 2 Detach the trim bezel. pushing the release button. 3 Unscrew the unit off the car on 4 Unscrew the Nut M5 screw on the rear side of the unit and pull out the unit. the two sides.
FRONT PANEL 1. POWER 2. F. REV 3. F. FWD 4. MENU 5. TILT 6. PLAY / PAUSE 7. PREV 8. NEXT 9. STOP 10. REMOTE 11. AUX IN 12. MIN USB 13. REL 1. Power When ACC is on, touch the button to turn the unit on; hold on touching the button to turn off the unit.
6. Play/Pause Touch to pause or resume the playback. 7. Next / 8. Previous Touch to go to the next / pervious chapter, track or song. 9. Stop When DVD/VCD/CD disc playback, touch the icon once to stop the playback, touch the [Play/Pause] icon to resume the playback again.
REMOTE CONTROL 1. POWER/SOURCE 13. PREVIOUS 25. SYSTEM / NAVI 2. MUTE 14. SLOW / END CALL 26. F.FWD 3. NUMBER BUTTONS 15. TITLE / PBN 27. RIGHT(Seek up) 4. MENU / * 16. ZOOM / CALL 28. STOP 5. AUDIO / # 17.
Page 16
1. [POWER/SOURCE] When ACC is on, press the button to turn the unit on; hold on pressing the button to turn off the unit. When the unit is on, press to switch between different modes. 2. [MUTE] Press to switch off the sound; press it again to resume to the previous volume level. 3.
Page 17
GPS Mode, press the [∨] / [∧] buttons to decrease / increase the brightness of the screen. 9. [BAND/ENTER] DVD Mode, press to confirm the selection. Radio Mode, press to switch the wave band as following: FM1 – FM2 - FM3 - AM1- AM2 - FM1 TV Mode, press to switch the TV audio as following: NTSC –...
Page 18
18. [OPEN/CLOSE/P.ANGLE/EJECT] Press the button to open the monitor to eject the disc, press it again to close the monitor. Hold pressing the button to enter into adjusting mode, press it again to adjust the angle of the front panel as following: Angle 1 - Angle 2 - Angle 3 - Angle 4 - Angle 1 19.
Page 19
32. [A-B/PHONE PAIR] DVD Mode, press to set point A, press it again to set point B, then the unit starts to repeat from A to B. When playing DVD, MP3, press it again to stop repeating. When playing VCD, CD, press it again to repeat all tracks. Bluetooth Mode, press to start phone-pairing.
TOUCH SCREEN OPERATIONS TOUCH SCREEN CALIBRATION When “Power Off”, press the buttons 2, [BAND] of remote control to enter the CALIBRATION page: To touch the points from 1 to 5 until the points change to next cross by using a ballpoint pen or pencil.
MAIN MENU 1, Touch to access the DVD mode. 2, Touch to access the RADIO mode. 3, Touch to access the iPod mode. 4, Touch to access the ATSC mode. 5, Touch to access the GPS mode. 6, Touch to access the SD CARD mode. 7, Touch to access the USB mode.
RADIO OPERATIONS Touch the [RADIO] icon to access to Radio Mode. 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2. Mute Touch to switch off the sound; touch it again to resume to the previous volume level. 3.
DVD PLAYER OPERATIONS 1, Touch the [DVD] icon to access to DVD Mode if disc inside. 2, The unit will be switched to DVD Mode automatically when inserting the disc. 3, The unit will switch to RADIO Mode automatically if disc ejected. 1.
Page 24
1. Capture Image Touch to capture the current playing image and store into memory for background or screen saver. 3. Display Touch to display the current playback information on the screen. 4. Repeat Touch to repeat as CHAPTER-TITLE-ALL-REPEAT OFF when DVD playback. Touch to repeat as TRACK-ALL-REPEAT OFF when VCD/CD playback.
Page 25
2. Setup Touch to access the DVD SETUP menu. Touch the [<] / [>] icons to switch the main menus as following: General – Speaker – Dolby Digital – Preference – General ∧ ∨ Touch the [ ] / [ ] icons to access the submenus from main menus.
Page 26
Screen Saver Select ON or OFF. Last Memory Select ON or OFF. Speaker Setup Page Downmix Following options are available for the Downmix: LT / RT Stereo Dolby Digital Setup Dynamic Following options are available for the Dynamic: FULL 6/8 OFF.
Page 27
Preference Page Audio Following options are available for the Audio Language: Danish Swedish Italian Portuguese Polish Korean Russian Dutch Subtitle Following options are available for the Subtitle Language: English French Spanish German Danish Swedish Italian Portuguese Polish Korean Russian Dutch Disc Menu Following options are available for the Disc Menu Language: English...
IPOD OPERATIONS (Optional) 1, Touch the [IPOD] icon to switch IPOD Mode if iPod connected. 2, The unit will switch to IPOD Mode automatically if iPod connected. 3, The unit will switch to RADIO Mode automatically if iPod disconnected. Music Page Under the Music Page, it is not effective for the controller of iPod itself, use the keys of unit to control the operation and all operations are same as DVD Mode.
Video Page Under the Video Page, use the controller of iPod itself to control all operations of iPod including play music, videos and view pictures. 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2.
AV IN OPERATIONS Touch the icon “AV IN” to enter the AV IN Mode: 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2. Mute Touch to switch off the sound; touch it again to resume to the previous volume level. NOTE: There are 2 RCA Audio Inputs &...
NAVI OPERATIONS (Optional) Touch Screen Calibration When 1 time to enter NAVI mode, you will see the calibration screen. Please touch the points from 1 to 5 by using a ballpoint pen or pencil. To verify the calibration, please touch the points from 1 to 5 again. Then the following screen is displayed: - 30 -...
Page 32
The Touch Screen is restored to their default positions. Touch anywhere of panel to finish the calibration and go to the following screen: Read information and touch “I agree” button at the bottom of the screen, then enter the NAVI mode. NOTE: If change the NAVIbox to connect another unit, please take out the SD card from the NAVIbox and connect with computer, the following screen is displayed on computer:...
Page 33
Go to NAVI mode Touch the icon “NAVI” to enter the NAVI Mode if NAVIBOX connected: Following screen will be displayed: Read information and touch “I agree” button at the bottom of the screen. Enter the NAVI mode by main menu, the NAVI operations are effective only, all other processes are disable such as Radio, CD etc.
Page 34
Quick Access Key [NAVI] Under any working mode, hold on pressing the [MENU/NAVI] button to switch to NAVI mode; hold on pressing the [MENUNAVI] button again to return the previous working mode. For example, under Radio mode, hold on pressing the [MENU/NAVI] button to switch to NAVI mode;...
ATSC OPERATIONS (Optional) 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2. Mute Touch to switch off the sound; touch it again to resume to the previous volume level. 3. Play/Pause Touch to 4.
SYSTEM PARAMETERS SETUP Touch the [SYSTEM] icon to enter the System Parameters Setup. SCREEN SETUP 1. Contrast Touch [UP] / [DOWN] icons to adjust the CONTRAST parameters (Range: -9 to 9); 2. Tint Touch [UP] / [DOWN] icons to adjust the TINT parameters (Range: -9 to 9); 3.
Page 37
4. Sub-Woofer Volume Touch [UP] / [DOWN] icons to adjust the SUB-WOOFER volume parameter (Range: 0 to 15); 5. Buzzer Touch to turn Buzzer on or off; 6. Balance / Fader Touch [LEFT] / [RIGHT] icons to adjust the BALANCE parameters (Range: -9 to 9); Touch [FRONT] / [REAR] icons to adjust FADER parameters (Range: -9 to 9);...
Page 38
1. Captured Images List Touch [UP] / [DOWN] icons to select the image captured from DVD, SD card and USB. 2. Screen Saver Images List Touch [UP] / [DOWN] icons to select the image of screen saver. 3. Desktop Touch to set the selected image of captured images list as desktop image. 4.
SPECIFICATIONS GENERAL Supply Voltage : 14.4V DC (11-16V allowed) Load Impedance : 4Ω per channel Max Power Output : 50W x 4 : ≥ 10dB Bass 100Hz : ≥ 10dB Treble 10KHz Dimensions (approx.) : 183 x 188 x 60 mm (d/w/h) Mounting (approx.) : 160 x 178 x 50 mm (d/w/h) FM TUNER...
TROUBLE SHOOTING If any of problem persists after checking the below list, Please consult your nearest service dealer. Never attempt to disassemble and repair unit personally. Problem Cause Action GENERAL Yellow wire not connected or incorrect Check connections for proper voltage Re wire not connected voltage(11-16vdc) or incorrect...
Page 41
Problem Cause Action TFT MONITOR No video display Reverse circuit not connected Check connections at reverse lamp (when in Vehicle is not in reverse Select reverse gear reverse) Front panel will Remove the obstruct and press Front panel obstructed OPEN to resume the monitor open/close open/close sequence Flashing image...
DISC NOTES ■ Disc formats supported by this player Handling and Cleaning ● Dirty, dusty, scratched or warped discs will cause misoperation. ● Do not place stickers or make scratches on discs. ● Do not warp discs. ● A disc should always be kept in its case when not in use to prevent from damage. ●...