Installing Mass Storage Devices - Compaq ProLiant 850R Setup And Installation Manual

3-28 Installing Hardware Options
DIMMs can be placed in any slot; the system ROM automatically
recognizes and configures memory changes.
6. Replace the expansion boards you removed. Reverse the steps you
followed to remove the expansion boards.

Installing Mass Storage Devices

There are four drive bays for internal mass storage devices in the ProLiant
850R server. SCSI devices can be installed in drive bays 0, 2, 3, or 4, or
attached to the external Fast-Wide SCSI-2 port via an external storage system.
SCSI hard drives attached to the SCSI controller must be either internal or in an
external storage system, but not both.
Figure 3-29.
CAUTION: The ProLiant 850R server does not support the installation of
IDE or EIDE fixed disk drives.
0 1
Optional mass storage device placement
2 3
4