Server Installation Overview - Compaq ProLiant 850R Setup And Installation Manual

Chapter 2

Server Installation Overview

This section covers the following information about your new ProLiant 850R
server:
Installing the Server into the rack, including:
How to access the internal components of the rack-mounted server.
!
WARNING: To reduce the risk of electric shock or damage to the
equipment:
WARNING: Because the rack allows you to stack computer components
!
on a vertical rather than horizontal plane, you must take precautions to
provide for rack stability and safety. It is important that you follow these
precautions to provide for rack stability and safety. It is important that you
follow these basic instructions to protect both personnel and property, that
you heed all cautions and warnings throughout the installation
instructions.
CAUTION: Electrostatic discharge can damage electronic components.
Be sure you are properly grounded before beginning any installation
procedure. Refer to Appendix A, "Electrostatic Discharge," for more
information.
How to attach the mounting hardware to the rack
How to place the server into the rack and attach cables
Do not disable the power cord grounding plug. The grounding plug is
an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet
that is easily accessible at all times.
Disconnect power from the server or other product by
unplugging the power cord from either the electrical outlet or
the server or other product.
2-1