Page 2
Technical file at: * 4530 SW1*4530** 2006/42/EC EN 62841-1:2015 2014/30/EU EN 62841-2-11:2016 +A1:2020 2011/65/EU EN 55014-1: 2021 EN 55014-2: 2021 EN 61000-3-2: 2019+A1: 2021 EN 61000-3-3: 2013+A1:2019 EN 63000: 2018 * Skil BV Rithmeesterpark 22 A1 4838 GZ Breda The Netherlands 21.10.2022...
Page 3
Chervon Europe Ltd., 34 Bridge Street, Reading, RG1 2LU, United Kingdom, as authorized representative (in terms of above regulations) acting on behalf of Skil BV, Rithmeesterpark 22 A1, 4838GZ Breda, The Netherlands James McCrory Technical Service Manager Place of issue: Reading...
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of Jig saw 4530 electric shock. e) When operating a power tool outdoors, use an INTRODUCTION extension cord suitable for outdoor use.
Page 11
ACCESSORIES control of the tool in unexpected situations. • SKIL can assure flawless functioning of the tool only 5) SERVICE when original accessories are used • Do not use a saw blade which is cracked, deformed or...
• If the tool should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an after-sales service centre for SKIL power tools - send the tool undismantled together with proof of purchase to your dealer or the nearest SKIL service station (addresses as well as the service diagram of the tool are listed on www.skil.com)