Sony BDP-S1000ES Connecting Manual page 15


Internet Settings - Security Settings
Select the security method.
WPA2-PSK (AES)
WPA-PSK (AES)
WPA-PSK (TKIP)
WEP
None
Check that "None" is selected, and press
ENTER.

Internet Settings - IP Address Setting Method
Select the method for setting IP address.
Auto Acquisition
Manual
Select the following items on the
respective screens.
"IP Address Setting Method" screen:
Select "Auto Acquisition" (unless you use a static
IP address), and press ENTER.
"DNS Setting Method" screen:
Select "Auto" (unless you specify a DNS server),
and press ENTER.
"Proxy Server" screen:
Select "Do not use" (unless your Internet service
provider has a specific proxy server setting), and
press ENTER.
"Network Connection Diagnostics" screen:
Select "Perform, " and press ENTER.
If an error message appears, follow the on-
screen instructions.
For further details, visit the following
website and check the FAQ contents:
http://www.sony.com/blurayupdate

Internet Settings - Complete Settings
Settings are complete.
List of settings
Connection Method Wireless
Wireless LAN Setting Method Access point scan
SSID AP_for_BDP
Security Setting None
IP Address Settings Auto Acquisition
IP Address 192.168.011.002
Subnet Mask 255.255.255.000
Finish
Press ENTER when "Settings are
complete. " appears.
Wi-Fi Setup is finished.
 Tip
If an error message appears in the network
diagnostic results, check the message and set
the network settings again.
1