Sony BDP-S1100 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVD Player
  5. BDP-S1100
  6. Service manual

Sony BDP-S1100 Service Manual

Blu-ray disc/ dvd player
Hide thumbs Also See for BDP-S1100:
Table of Contents

Advertisement

Quick Links

BDP-S1100/BX110/S3100/BX310
SERVICE MANUAL
Ver. 1.0 2012.11
System
Laser: Semiconductor laser
Inputs and outputs
( Jack name:
Jack type/Output level/Load impedance)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT:
HDMI 19-pin standard connector
LAN (100):
100BASE-TX Terminal
USB:
BDP-S1100/BX110 (Basic)
USB jack Type A, maximum current 500 mA (For connecting USB device)
BDP-S3100/BX310 (WLAN)
USB jack Type A (For connecting a USB memory,memory card reader,
digital still camera, and digital video camera)
Wireless (BDP-BX310/S3100 ONLY)
Wireless LAN standard:
IEEE 802.11 b/g/n
Frequency range:
2.4 GHz band : Channels 1-11 : US,CND / Channels 1-13 : Other
Modulation:
DSSS and OFDM
This product meets ENERGY STAR® guidelines for energy
effi ciency. ENERGY STAR and the ENERGY STAR mark
are registered U.S. marks. ENERGY STAR is a registered
mark owned by the U.S. government.
(BDP-S1100/BX110/S3100:US,CND/BX310)
9-890-795-11
RMT-B120A/B119C/ B119P/ B119A/B119T
Mexican Model
Australian/NZ Model
Latin America Model
Chile Models
Photo: BDP-S1100
Remote : RMT-B119A
SPECIFICATIONS
Blu-ray Disc™ / DVD Player
Sony Corporation
Home Entertainment Business Group
UK Model
AEP Model
BDP-S1100/S3100
Middle East Model
Saudi Arabia Model
BDP-S1100/BX110/S3100/BX310
General
Power requirements:
220 – 240V AC, 50/60Hz (BDP-S1100:UK,AUS,AEP,CH,RUS/S3100:UK,AUS,AEP)
110 – 240V AC, 50/60Hz (BDP-S1100:E,MX,EA,KS,IN,PX,SP,TH,CL/
S3100:E,MX,CL)
120V AC, 60Hz (BDP-S1100/S3100/BDP-BX110/BX-310:US,CND)
110V AC, 60Hz (BDP-S1100:TW)
Power consumption:
8.8 W (BDP-S1100/ BX110)
9.9 W (BDP-S3100/ BX310)
Dimensions (approx.):
290mm × 199mm × 43mm
(11 (1/2) in. × 7 (7/8) in. × 1 (3/4) in.)
(width/depth/height) incl. projecting parts
Mass (approx.):
1.1 kg (2 lb 7 oz)
Operating temperature:
5ºC to 35ºC(41ºF to 95ºC)
Operating humidity:
25 % to 80 %
Supplied accessories
• High Speed HDMI cable (1)
(BDP-BX110/BX310:US,CND/
S1100:CH,E,MX,EA,KS,IN,SP,TH,CL,TW/S3100:E,MX,CL)
• LAN cable (1) (BDP-S1100: TW)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
Specifi cations and design are subject to change without notice.
PX Model
Russian Model
Singapore Model
Thailand Model
India Model
Taiwan Model
Chinese Model
BDP-S1100
US Model
Canadian Model
2012K6900-1
© 2012.11
Published by Document Design Dept.

Advertisement

Table of Contents
loading

Related Manuals for Sony BDP-S1100

Summary of Contents for Sony BDP-S1100

  • Page 1 Remote : RMT-B119A SPECIFICATIONS System General Laser: Semiconductor laser Power requirements: Inputs and outputs 220 – 240V AC, 50/60Hz (BDP-S1100:UK,AUS,AEP,CH,RUS/S3100:UK,AUS,AEP) ( Jack name: 110 – 240V AC, 50/60Hz (BDP-S1100:E,MX,EA,KS,IN,PX,SP,TH,CL/ Jack type/Output level/Load impedance) S3100:E,MX,CL) 120V AC, 60Hz (BDP-S1100/S3100/BDP-BX110/BX-310:US,CND) DIGITAL OUT (COAXIAL): 110V AC, 60Hz (BDP-S1100:TW) Phono jack/0.5 Vp-p/75 ohms...
  • Page 2 CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE Unleaded solder is more viscous (sticky, less prone to flow) than REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY ordinary solder so use caution not to let solder bridges occur such DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU as on IC pins, etc.

  • Page 3: Table Of Contents

    BDP-S1100/BX110/S3100/BX310 TABLE OF CONTENTS Section. Title. Page. SERVICE NOTE Disc Removal Procedure If The Tray Cannot Be Ejected (Forced Ejection) ..............1-1 1-2. Work when optical device are replaced ..........1-1 1-3. Test Disc ....................1-2 1-3-1. Operation and Display ................1-2 1-3-2. Menu functions ..................1-9 1-4.

  • Page 4: Service Note

    BDP-S1100/BX110/S3100/BX310 SECTION 1 SERVICE NOTE 1-1. DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION) 1. Remove the side panel left. (Refer to page 2-1) 2. Insert a clip in the hole of a drive and open a tray.

  • Page 5: Test Disc

    BDP-S1100/BX110/S3100/BX310 1-3. TEST DISC Part No. Description Layer J-6090-199-A BLX-104 Single Layer J-6090-200-A BLX-204 Dual Layer J-2501-307-A CD (HLX-A1) J-2501-305-A HLX-513 Single Layer (NTSC) J-2501-306-A HLX-514 Dual Layer (NTSC) J-6090-077-A HLX-506 Single Layer (PAL) J-6090-078-A HLX-507 Dual Layer (PAL) 1-3-1. Operation and Display...
  • Page 6 BDP-S1100/BX110/S3100/BX310 1-3-1-1. BLX-104 Menu Function (1) Main Menu 1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed. 1-3-1-2. BLX-104 Menu Function (2) Main Menu To Main Menu after playback of T62_C1...
  • Page 7 BDP-S1100/BX110/S3100/BX310 1-3-1-3. BLX-104 Menu Function (3) Main Menu To Main Menu after playback of T52_C1 To Main Menu after playback of T51_C1 To Main Menu after playback from T44_C1 to T50_C1 Sub_menu2 is displayed To Main Menu after playback of T42_C1...
  • Page 8 BDP-S1100/BX110/S3100/BX310 1-3-1-4. BLX-104 Menu Function (4) Sub menu1 1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selec- tively displayed on Sub menu1 screen.
  • Page 9 BDP-S1100/BX110/S3100/BX310 1-3-1-5. BLX-104 Menu Function (5) Sub menu2 1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.
  • Page 10 BDP-S1100/BX110/S3100/BX310 1-3-1-6. BLX-104 Menu Function (6) Sub menu3 1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.
  • Page 11 BDP-S1100/BX110/S3100/BX310 1-3-1-7. BLX-104 Menu Function (7) Sub menu4 1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.

  • Page 12: Menu Functions

    BDP-S1100/BX110/S3100/BX310 1-3-2 Menu Function 1-3-2-1. BLX-204 Menu Function (1) Main Menu 1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed. 1-3-2-2. BLX-204 Menu Function (2) Main Menu To Main Menu after playback of T83_C1...
  • Page 13 BDP-S1100/BX110/S3100/BX310 1-3-2-3. BLX-204 Menu Function (3) Main Menu To Main Menu after playback of T70_C1 To Main Menu after playback of T52_C1 T69 To Main Menu after playback of T51_C1 To Main Menu after playback of T44_C1-T50_C1 T71_C1-T81_C1 Sub_menu2 is displayed...
  • Page 14 BDP-S1100/BX110/S3100/BX310 1-3-2-4. BLX-204 Menu Function (4) Sub menu 1 1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selec- tively displayed on Sub menu1 screen.
  • Page 15 BDP-S1100/BX110/S3100/BX310 1-3-2-5. BLX-204 Menu Function (5) Sub menu 2 1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.
  • Page 16 BDP-S1100/BX110/S3100/BX310 1-3-2-6. BLX-204 Menu Function (6) Sub menu 3 1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.
  • Page 17 BDP-S1100/BX110/S3100/BX310 1-3-2-7. BLX-204 Menu Function (7) Sub menu 4 1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.

  • Page 18: Drive Repairing

    BDP-S1100/BX110/S3100/BX310 1-4 .DRIVE REPAIRING 1-4-1. Preparation • ESD Measures It is necessary to check the working space ESD condition before starting the Drive Part (BU) repairs The ESD-resistance of BD Laser is weaker than DVD/CD Laser To prevent ESD destruction, please make sure the working space and human ESD.

  • Page 19: Bu Check Flow [Zz]

    (Flowchart yy) 1-4-4. BU (Optical Block) Repair Guide BDP-S1100/BX110/S3100/BX310 series component structure is as same as conventional DVD Players. However BD player requires precise read out functions and also secure contents Protection system. Since above requirement, it is necessary to set/adjust BU data to EEPROM.

  • Page 20: Bu Adjustment Flow [Yy]

    BDP-S1100/BX110/S3100/BX310 1-4-5. BU Adjustment Flow [yy] ~ Optical Block Unit (BU) OP Data Write Flow (yy) ~ [After BU/MB Replacement] Remove the defective BU from Loading The following cases need OP Data Write: Assy and also remove BU insulator (4pcs)

  • Page 21: Bu Data Decode Jig

    BDP-S1100/BX110/S3100/BX310 1-4-7. BU Data Decode Jig • JIG Name : BDPRdec.exe • Release : 2011.8.25 • Version : 3.0.0.0 • Software Contents BDPRdec.exe ; Software SavePath.ini ; Decoded fi le destination setting fi le (initial destination is C:\BuData.txt) TasmanBars.dll ; decode dll Uninst.exe ;...

  • Page 22: Loading For Service

    BDP-S1100/BX110/S3100/BX310 1-4-8. Loading For Service BDP 8G Loading Assy service parts consists from 2 parts. 1  Holder, Clamper Assy 2 Loading Assy Currently these parts are producing by 2 vendors. Please DO NOT COMBINE 1 and 2 (From different vendor) because THERE IS NO COMPATIBILITY.

  • Page 23: 1-4-10.In Case Of Bu Assy Replacement

    BDP-S1100/BX110/S3100/BX310 1-4-10. In case of BU assy replacement: 1. OP related data for new assy is controlled by BU factory 2. All of data is recorded into a barcode label 3. The label is put on the assy 4. Service parts will be followed 5.

  • Page 24: Assembly Caution

    BDP-S1100/BX110/S3100/BX310 1-5. ASSEMBLY CAUTION 1-5-1. WLAN HARNESS (USB-1001) DRESSING METHOD Stopper slot UL tape 1. Ensure connector mating condition fully insert 1. Ensure UL tapes are below PS insulator stopper slot. (No slanting / No pin dislocated). 2. Avoid handling at UL tape area.
  • Page 25 BDP-S1100/BX110/S3100/BX310 1-5-2. Front panel assemble caution. 1-5-2.1 Upper case placed slightly vertical with stopper at front panel both left and right 1-5-2.2 The stopper will used has rotate guide when upper case moved downward from this position. Stopper front panel right side.

  • Page 26: Disassembly

    BDP-S1100/BX110/S3100/BX310 SECTION 2 DISASSEMBLY • This set can be disassembled in the order shown below. 2-1. DISASSEMBLY FLOW 2-2 UPPER CASE AND TRAY COVER ASSY (Page 2-1) 2-3 FRONT PANEL, 2-4 SWITCHING REGULATOR 2-5 BD DRIVE FR-1001 boards, AND MB-1007 BOARD...

  • Page 27: Front Panel, Fr-1001 Board And Wlan Module

    BDP-S1100/BX110/S3100/BX310 2-3. FRONT PANEL, FR-1001 BOARD AND WLAN MODULE WLAN Module One screw +BV3(3-CR) Flexibleflat cable (FIM-1001) (CN701) Harness (USB-1001) (CNxxx) FR-1001 Board Earth plate Five hook Two screws +BV3(3-CR) Front Panel *Note : Hold upward hook No. 3 when unhook no 4 and 5.

  • Page 28: Bd Drive

    BDP-S1100/BX110/S3100/BX310 2-5. BD DRIVE 2-6. CIRCUIT BOARDS LOCATION MB-1007 board WLAN Module Switching regulator FR-1001 Board...

  • Page 29: Frame Harness

    BDP-S1100/BX110/S3100/BX310 SECTION 3 FRAME HARNESS AND BLOCK DIAGRAMS 3-1. FRAME HARNESS BDP-S3100/BX310 Only...

  • Page 30: Overall Block Diagram

    BDP-S1100/BX110/S3100/BX310 3-2. OVERALL BLOCK DIAGRAM Q402 CEC PULL-UP UNSW3-3V ISOLATING SWITCH CN380 LAN (100) Q301 LED DRIVER (AC IN) CN201 WLAN MODULE BDP-S3100/BX310 ONLY The components identi ed by Notes: mark or dotted line with mark MB-1007 mounted PWB must be replaced if are critical for safety.

  • Page 31: Power Block Diagram

    BDP-S1100/BX110/S3100/BX310 3-3. POWER BLOCK DIAGRAM MB-1007 BOARD IC202 DDR_1.5V IC102 DDR_1.5V DDR3 CN201 PCONT1# IC103 PS202 DDR3 CN401 UNSW12V HDMI 5V HDMI OUT IC 407 REGULATOR PCONT1 (UNSW3.3V) DVCC33_IO_STB IC202 CORE_1.2V AVDD12_HDMI_D CN380 UNSW 12V CORE_1.2V ETHERNET AVDD12_HDMI_C PCONT1# 1.2V (SW3.3V)

  • Page 32: Printed Wiring Boards

    BDP-S1100/BX110/S3100/BX310 SECTION 4 PRINTED WIRING BOARDS 4-1. THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS : Uses unleaded solders. : Pattern from the side which enables seeing. (The other layers’ patterns are not indicated) Caution: Pattern face side: Parts on the pattern face side seen from (SIDE B) the pattern face are indicated.

  • Page 33: 1001 Board (Front Right) Printed Wiring Board

    BDP-S1100/BX110/S3100/BX310 4-2 . FR-1001 BOARD (FRONT RIGHT) PRINTED WIRING BOARD There are a few cases that the part isn’t mounted in this model is printed on this diagram. • See page 2-5 for circuit boards location. - Ref. No.: FR-1001 board; 20,000 series - : Uses unleaded solder.

  • Page 34: Mb-1007 Board(Main) Printed Wiring Board (Side A)

    BDP-S1100/BX110/S3100/BX310 4-3 . MB-1007 BOARD (MAIN) PRINTED WIRING BOARD (SIDE A) There are a few cases that the part isn’t mounted in this model is printed on this diagram. • See page 2-5 for circuit boards location. - - Ref. No.: MB-1007 board; 10,000 series - : Uses unleaded solder.

  • Page 35: Mb-1007 Board (Main) Printed Wiring Board (Side B)

    BDP-S1100/BX110/S3100/BX310 4-4 . MB-1007 BOARD (MAIN) PRINTED WIRING BOARD (SIDE B) There are a few cases that the part isn’t mounted in this model is printed on this diagram. • See page 2-5 for circuit boards location. - - Ref. No.: MB-1007 board; 10,000 series - : Uses unleaded solder.

  • Page 36: Service Mode And Error Log List

    POWER ON SET INTO NORMAL MODE. WHEN CROSS MEDIA BAR APPEAR. Use Sony BDP remote controller, key in the following SIRCS code. [DISPLAY] -> [ 0 ] -> [ 2 ] -> [ 1 ] -> [SUBTITLE] While sending of SIRCS code, wait time between each key code could not send later then 3 second.
  • Page 37 BDP-S1100/BX110/S3100/BX310 Main function Diag The unit test of the device mounted on the MainBoard. The unit test of the device mounted on the wireless board. (only wireless model) Display Error Log Error log is displayed. The displayed logs can be saved in a USB memory.
  • Page 38 BDP-S1100/BX110/S3100/BX310 Function Support List Service Mode Menu BDP- BDP- BDP- (Top) category Device S1100/BX110 S3100/BX310 BDP-S4100 S5100/BX510 (FRONT and REAR (FRONT and REAR (FRONT ONLY) (FRONT ONLY) ONLY) ONLY) Diag Device Test D/A Converter IFCON *FDP all ON *Show Strings...
  • Page 39 BDP-S1100/BX110/S3100/BX310 *Diag Device Test Diag Test USB/DAC/IFCon/ test Video Test Error Log *Log Video Output Test view Error log view Error Log Audio Test Audio Output Test *Factory Initialize Start Initialize Audio input Test Initialize default setting Initialize default setting for BD-Player...
  • Page 40 BDP-S1100/BX110/S3100/BX310 Outline Service Mode Top Menu It selects to each function from here. output HDMI/Component 480p forcibly. Operation Select and Activate Diag Menu. Select and Activate Log Menu, Select and Activate Factory Initialize Menu., Select and Activate Network Menu Select and Activate Version Up...
  • Page 41 BDP-S1100/BX110/S3100/BX310 Diag Menu (Device Test) (additional) Front Panel Display (For FLD display Available model only ) Device Select : USB D/A Converter : DAC IFCON : IFCON : MFI External HDMI HDMI Transcoder : TRAN Video Test : : VIDEO...
  • Page 42 BDP-S1100/BX110/S3100/BX310 (Video Test/ Audio Test) Outline: Activate Video Test and Audio Test (Window 1)Select Video Test Category Operation: [ENT] Activate and display Color Bar [UP][RET] Return to test category selection. (Window 2)Display Color Bar Operation [ENT] Return to Select Video Test Category.
  • Page 43 BDP-S1100/BX110/S3100/BX310 Diag Menu (Wireless LAN Test) <only Wireless Model> Outline: Activate Wireless LAN Tests (Window 1)Select Wireless LAN Test Category Operation: [LEFT] [RIGHT] Select Category [DOWN][ENT] Activate the selected Category. [RET] Return to Service Top Menu. (Window 2) Select Wireless LAN Test...
  • Page 44 BDP-S1100/BX110/S3100/BX310 Log Menu Outline Display each contents of the log, (Window 1) select log. Operation Activate and Display Error log Activate and Display Command Log [UP] Move Up cursor [DOWN] Move Down cursor [ENT] Activate the selected cursor. [RET] Return to Service Top Menu.
  • Page 45 BDP-S1100/BX110/S3100/BX310 Factory Initialize Outline: Return all of the player setting to their factory defaults. (Window 1) select initialize. Operation When you return a set to the factory defaults, push [1] on this screen. [ENT] Start Factory Initialize [RET] Return to Service Top Menu.
  • Page 46 BDP-S1100/BX110/S3100/BX310 Network Network Test: Ifconfig Outline Network Menu for the wired Ethernet. (Window1)Ifconfig Test Operation [ENT] Activate Ifconfig Display network setting [RIGHT] Select Ping Test. [RET] Return to Service Top Menu. (Window 2)Ping Test Operation: [LEFT] Select Ifconfig Test. [RET] Return to Service Top Menu.
  • Page 47 BDP-S1100/BX110/S3100/BX310 Network Network Test: Ping Outline Ping Test for the wired Ethernet. (Window 1)Ping Test Operation: [LEFT] Select Ifconfig Test. [DOWN] Ping execution preparation. [RET] Return to Service Top Menu. (Window 2) The IP address of the Ping point is set up.
  • Page 48 BDP-S1100/BX110/S3100/BX310 Version Up using Update DISC Outline: update software using DISC (Window 1)Version Up Menu Operation: Start Update (Tray Open and go to window 2) [UP] Move Up cursor [DOWN] Move Down cursor [ENT] Activate the selected cursor. [RET] Return to Service Top Menu.
  • Page 49 BDP-S1100/BX110/S3100/BX310 System Information Outline: Display System Information (Window 1)Basic Information Menu Operation: [RIGHT] Drive Information (delta IOP of a drive is measured ) and Wireless device Information (only wireless model) displayed. (go to window 2) [RET] Return to Service Top Menu.
  • Page 50 BDP-S1100/BX110/S3100/BX310 Drive Test (window 1) (window 1) * Diag * Diag Outline： Activate Drive test [1] Drive OP data Write [1] Drive OP data Write [2] Servo Parameter Check Menu [2] Servo Parameter Check Menu (Window 1) Select Drive test category (Window 2) (Window 2) Operation： [3] Servo Signal Check Menu [3] Servo Signal Check Menu * Drive OP data Write * Drive OP data Write [LEFT] [RIGHT] Select Category [4] S [4] S-Curve Check Menu Curve Check Menu [DOWN][ENT] Activate the selected Category.
  • Page 51 BDP-S1100/BX110/S3100/BX310 Error Log Information 5-16...
  • Page 52 BDP-S1100/BX110/S3100/BX310 History ver 0.10 2012.08.1 Kong/Reen First release  2012.11.1 Kong/Reen Modify page 17. Add windows 4. 0.20 5-17...

  • Page 53: Troubleshooting

    BDP-S1100/BX110/S3100/BX310 SECTION 6 TROUBLESHOOTING 6.1 Main Flow ........................6-2 6.2 Power (System) Flow ..................... 6-3 6.3 Audio section fl owchart ....................6-4 6.4 Video section fl owchart ....................6-5 6.5 FR-1001 Board fl owchart ....................6-6 6.6 Remote does not operate ....................6-7 6.7 White LED fl...

  • Page 54: Main Flow

    BDP-S1100/BX110/S3100/BX310 6-1. Main Flowchart Start (and return from each r LED Light up about 10s and Are the all er line r supply pp y turn o automa cally er o (9 3 (9-3 normal ? Check IC212, pin 4 (outpu must 3.3V...

  • Page 55: Power (System) Flow

    BDP-S1100/BX110/S3100/BX310 6-2. Power (System) Flow AC IN Check the output voltages from the power supply block. Check that the harness has been inserted CN201 pin 1: +12V (UNSW12V) properly. If there is no problem, CN201 pin 2: +12V (FE_UNSW12V) power supply block NG.

  • Page 56: Audio Section Fl Owchart

    BDP-S1100/BX110/S3100/BX310 6-3. Audio section fl owchart Audio does not sound right? Video is output properly? To Video section flowchart To Main flowchart Is the drive operating properly? To Drive flowchart Is there AUDIO digital signal (SPDIF) input Replace the MB board...

  • Page 57: Video Section Fl Owchart

    BDP-S1100/BX110/S3100/BX310 6-4. Video/HDMI section fl owchart Reproduced Video does not appear right Power Check e i l IC101 (#P217: +3.3V) IC101 (#P226: +1.2V) Is Power Supply supplied at IC407? IC407 (#4: +5V) Is PCONT#1 at IC407 (#1: +3.3V)? Check the writing from IC101 for PCONT#1 or IC101 is NG...

  • Page 58: 1001 Board Fl Owchart

    BDP-S1100/BX110/S3100/BX310 6-5. FR-1001 Board fl owchart Key1 does not operate Does FFC disconnected Does symptom improve when replace CHECK IC101 from Is there voltage of about 3.3V at pin CN701 or broken Does FFC disconnected Check IC101, FR-1001 board? CN701...

  • Page 59: Remote Does Not Operate

    BDP-S1100/BX110/S3100/BX310 6-6. Remote does not operate Check of +3.3V voltage at CN303 pin 1? Check of +3.3V voltage at IC710 pin1? To Power supply flow chart (MB board) Check of +3.3V voltage at CN701 pin 1? Check FFC disconnected from...

  • Page 60: White Led Fl Owchart

    BDP-S1100/BX110/S3100/BX310 6-7. White LED fl owchart White LED does not light Check +5V voltage at CN701 pin6? Is there a voltage of about +5V at emitter Q301 Check +5V voltage at CN303 pin6? Check Power flowchart Is there a voltage about FR Board NG.

  • Page 61: Drive Fl Owchart

    BDP-S1100/BX110/S3100/BX310 6-8. Drive fl owchart BLX-104 Check Drive Power Supply BDP-S1100/BX110/S3100/BX310 IC210 Pin 3: 5V Check PS201, PS202 can play the BD-disc Q211 Pin 6: 12V Check / replace the FFC cable, then check Check the Optical Block Unit (BU) by BDP-S1100/BX110/S3100/BX310 service mode.

  • Page 62: Ethernet/Wifi Fl Owchart

    BDP-S1100/BX110/S3100/BX310 6-9. Ethernet/Wifi fl owchart Ethernet fl owchart Cannot connect with the network, cannot update through the network Is the LAN cable plugged in properly? Plug in the LAN cable firmly Is the LED of the hub router lit? Is power supplied to the MB board?

  • Page 63: Usb (Front) Device Flow

    BDP-S1100/BX110/S3100/BX310 6-10. USB (Front) Device Flow USB device is not recognized Insert the USB device again. Is 5V present at CN201(FR-1001) Power supply IC370 (MB board - Is 5V present at IC370 pin1 Is it recognized when the power is...

  • Page 64: Repair Parts List

    BDP-S1100/BX110/S3100/BX310 SECTION 7 REPAIR PARTS LIST 7-1. EXPLODED VIEWS NOTE: The components identifi ed by mark or dotted • Items marked “*” are not stocked since they are sel- • -XX and -X mean standardized parts, so they may dom required for routine service. Some delay should line with mark are critical for safety.

  • Page 65: Main Chassis Section

    SERVICE ASSY, MB (BDP-BX110:CND/BDP-S1100:CND) A-1905-690-A SERVICE ASSY, MB (BDP-BX110:US/BDP-S1100:US,PX) A-1933-697-A SERVICE ASSY, MB (S1100:TW) 1-491-864-11 SWITCHING REGULATOR(SRV2289UC) (BDP-BX110/BDP-S1100:US,CND/BDP-BX310/BDP-S3100:US,CND) 1-491-848-11 SWITCHING REGULATOR(SRV2290WW) (BDP-S1100:Except US,CND/BDP-S3100:Except US,CND) 1-839-637-11 POWER-SUPPLY CORD (BDP-S1100:TW) 1-839-635-11 POWER-SUPPLY CORD (BDP-S1100:IN) 1-839-634-11 POWER-SUPPLY CORD (BDP-S1100:TH) 1-839-447-11 POWER-SUPPLY CORD (BDP-S1100:AUS/BDP-S3100:AUS)

  • Page 66: Bd Section

    BDP-S1100/BX110/S3100/BX310 7-1-3. BD SECTION The components identifi ed by mark or dotted Les composants iden tifi és par une marque sont critiquens pour la sécurité. line with mark are critical for safety. Ne les remplace r que par une pièce portant le Replace only with part number specifi...

  • Page 67: Accessories

    BDP-S1100/BX110/S3100/BX310 7-1-4. ACCESSORIES HDMI Cable Conversion Adaptor Remote Commander The components identifi ed by mark or dotted Les composants iden tifi és par une marque sont critiquens pour la sécurité. line with mark are critical for safety. Ne les remplace r que par une pièce portant le Replace only with part number specifi...
  • Page 68 BDP-S1100/BX110/S3100/BX310 REVISION HISTORY 2012.11...

This manual is also suitable for:

Bdp-bx110Bdp-s3100Bdp-bx310Rmt-b120aRmt-b119cRmt-b119p ... Show all

Table of Contents