Table of Contents
Advertisement
VEHICLE CONTROLS
Smart Entry System*
When you carry the remote transmitter (for example, in a pocket or purse) and it
is outside the vehicle and within range (about 32 inches or 80 cm), you can lock or
unlock the doors and hatch without handling the transmitter.
Unlocking/Locking the Doors
To unlock: Grab the driver's door handle (when the
vehicle is off) to unlock the driver's door. Grab the
front passenger's door handle to unlock all doors
and the hatch.
To lock: Press the lock button on the front door
handle or on the hatch when the vehicle is off. If the
remote transmitter is inside the vehicle, the doors
and hatch will not lock.
Opening/Closing the Hatch
To open: Press the hatch release button to unlock
and open the hatch.
To close: Grab the inner handle to pull the hatch
down, then push it closed from the outside.
32 |
Door Lock Button
Hatch Release Button
Inner Handle
*if equipped
Customizing Door Lock Settings
n
Customize the auto door-lock setting to your preference. Begin with the vehicle off.
Models with information display
Models with continuously variable transmission
Steps
Driver's Door Open Mode
*1
Apply the parking brake.
Apply the parking brake.
1
Models with continuously variable transmission
Move the shift lever to P.
Move the shift lever out of P.
2
Close the driver's door.
3
Turn the ignition switch to ON.
Press and hold the left side of the master door lock switch on the driver's door for more than ve seconds. Release the switch
after you hear a click twice.
4
Turn the ignition switch to ACCESSORY within 20 seconds.
5
Customization is completed.
*1:Default setting
Steps
Drive Lock Mode
*1
Apply the parking brake.
1
Models with continuously variable transmission
Move the shift lever out of P.
2
Close the driver's door.
3
Turn the ignition switch to ON.
Press and hold the right side of the master door lock switch on the driver's door
for more than ve seconds. Release the switch after you hear a click twice.
4
Turn the ignition switch to ACCESSORY within 20 seconds.
5
Customization is completed.
*1:Default setting
Models with driver information interface
See Customized Features, page 52.
VEHICLE CONTROLS
Off
Park Unlock Mode
Apply the parking brake.
Models with continuously variable
transmission
Move the shift lever to P.
Open the driver's door.
Turn the ignition switch to ON.
Off
Apply the parking brake.
Models with continuously variable transmission
Move the shift lever to P.
Open the driver's door.
Turn the ignition switch to ON.
Press and hold the right side of the master door
lock switch on the driver's door for more than
ve seconds. Release the switch after you hear
one click.
| 33
Advertisement
Table of Contents
